Kia Ceed Service Manual PDF Download Free [2006 ~ 2012]

Kia Ceed Service Manual PDF Download Free [2006 ~ 2012]

Kia Ceed Service Manual PDF - Kia cerato service manual pdf, kia k2700 workshop manual free, kia service manual, kia ceed ed service manual, kia sedona repair manual free, kia ceed manual, kia carens service manual pdf, kia rio repair manual download free.

Kia cee'd used to be the name of a Korean compact car, but now it stands for an entire family: the five-door cee'd in its classic form introduced at the beginning of 2012; the cee'd Sportswagon station wagon, which appeared at the end of the year; and the 2013 pro_ceed, a three-door model with coupe-like styling. Prices start at 14,990 euros for a cee'd five-door with a 100-hp 1.4-liter gasoline engine; at 27,890 euros, a cee'd Sportswagon in Platinum Edition with the 1.6 CRDi and automatic transmission costs nearly double that. But that doesn't make it the most powerful cee'd, because the GT models as three- and five-door models are available with a 1.6-liter turbo and 204 hp. 230 top speed is specified for it, which is likely to plunge many premium carriage drivers into despair. 

The GT models are available in three versions as GT-Cup, -Challenge and -Track. The cee'd and Sportswagon start as Attract, with Edition 7, Vision, Spirit and Platinum Edition above them; at times there are also special models such as the Dream Team Edition. The pro_cee'd, on the other hand, is not available as an Attract, nor with the 100-hp gasoline engine, but starts with the 135-hp 1.6 GDI. There's also a new 1.6 CRDi with 128 hp, but that's tied to the higher-end trims. But still the best argument for a Kia: seven years or 150,000 kilometers warranty.

Those looking for a compact station wagon with good space and plug-in hybrid drive do not have much choice. The Ceed Sportswagon Plugin is one of the rare models. It requires almost no compromises in the interior, even under the trunk there are still small compartments - only a spare wheel no longer finds room. Otherwise, even four adults with plenty of luggage can go on a journey and enjoy the comfy comfort. The journey won't go that far purely electrically because the battery is empty after just under 50 km. However, the KIA is comparatively economical (18.9 kWh/100 km), so the Ceed manages with a more compact battery (8.9 kWh). Its advantage is that it can be recharged more quickly than in many competitors. 

If you continue driving with an empty battery, consumption is 5.8 l/100 km, which is a good value for a gasoline engine. This also makes it possible to get over the 37-liter gasoline tank. The fact that it does not score more than three stars in the ADAC Ecotest is only due to the pollutant emissions, which comply with all legal requirements but are not exemplary low. At over 35,000 euros, the base price in Spirit trim is very high at first glance, but the standard equipment is extensive; two packages for a total of just under 1,800 euros are sufficient and the car is practically fully equipped. 

The extensive equipment certainly puts the price into perspective, especially since you get a complex powertrain or practically two powertrains. Until the end of 2021, you can also benefit from the innovation bonus, which amounts to 6,750 Euros for the Ceed Plugin - plus VAT savings on the manufacturer's share of 2,250 Euros. Around 30,000 euros is quite attractive for the test car.

Kia Ceed Workshop Repair Manuals 

Title	File Size	Download Link
Kia Cee`d 2006 Service Manual.pdf	94.2Mb	Download
Kia Cee`d 2007 Service Repair Manual.rar	67.5Mb	Download
Kia Cee`d 2012 Service Repair Manual.rar	65.7Mb	Download

Kia Diagnostic Trouble Codes

Kia Diagnostic Trouble Codes

Kia Diagnostic Fault Codes

Kia logo

First position:

P – is for powertrain codes – the code is associated with engine and / or automatic transmission
B – is for body codes – the code is associated with the work of “body systems” (airbags, central locking, electric windows)
C – is for chassis codes – the code refers to the chassis system (chassis)
U – is for network codes – the code refers to the system of interaction between electronic units (for example, to the CAN bus)

Second position:

0 – common for OBD-II code
1 and 2 – manufacturer’s code
3 – reserve

The third position is the type of fault:

1 – fuel system or air supply
2 – fuel system or air supply
3 – ignition system
4 – auxiliary control

5 – idling
6 – ECU or its circuits
7 – transmission
8 – transmission

Fourth and fifth positions – Error serial number
2011> D 2.0 TCI-R> Air Conditioner> Air Conditioner (GEN)

B1204 Air mixture Potentiometer Open (Low) – Passenger
B1205 Air mixture Potentiometer Tight. (High.) – Passenger
B1208 Input potentiometer Open (Low)
B1209 Input potentiometer Short. (High.)
B1233 Temperature sensor inside the compartment. (Low)
B1234 Interior temperature sensor Open (High.)
B1237 Ambient temperature sensor (Low)
B1238 Ambient Temperature Sensor Open (High.)
B1241 Vapor Sensor (Low)
B1242 Vapor Sensor Open (High.)
B1245 Air mixture Potentiometer Open (Low) – (Driver)
B1246 Air mixture Potentiometer Tight. (High.) – (Driver)
B1249 Direction potentiometer Open (Low) – (Driver)
B1250 Directional potentiometer. (High.) – (Driver)
B1672 APT Sensor Fault – CAN Signal
B1685 Engine RPM fault – CAN Signal
B1686 Vehicle Speed ​​Sensor Fault – CAN Signal
B1687 Engine Coolant Temperature Sensor Circuit – CAN Signal
B1688 Cluster Ionizer Fault
B2406 Air mixture Motor – (Driver)
B2408 Engine intake system
B2409 Motor Control Flows – (Driver)
B2415 Air mixture Motor vehicle. doors – (Passenger)

2011> D 2.0 TCI-R> Airbag> Airbag (Event # 1)

B1101 Battery voltage High.
B1102 Low battery voltage
B1328 FIS (Front Impact Sensor) – (Driver) Defect
B1329 FIS (Front Impact Sensor) – (Driver) Communication error
B1330 FIS (Front Impact Sensor) – (Driver) Invalid ID
B1333 FIS (Front Impact Sensor) – (Passenger) Defect
B1334 FIS (Front Impact Sensor) – (Passenger) Communication error
B1335 FIS (Front Impact Sensor) – (Passenger) Invalid ID
B1346 Driver’s air cushion resistance too High. (1st stage)
B1347 Driver air cushion resistance too low. (1st stage)
B1348 Resistance of the driver air bag. on the ground (1st stage)
B1349 Resistance of the driver air bag. on the battery (stage 1)
B1352 Passenger airbag resistance too high. (1st stage)
B1353 Passenger airbag resistance too low. (1st stage)
B1354 Passenger airbag resistance circuit. on the ground (1st stage)
B1355 Passenger airbag resistance circuit. on the battery (stage 1)
B1361 Tensioner Front- (Driver) Resistance too High.
B1362 Tensioner Front- (Driver) Resistance too Low.
B1363 Tensioner Front- (Driver) Resistance chain. Zakoroch. to the ground
B1364 Tensioner Front- (Driver) Resistance chain. Zakoroch. on the battery
B1367 Tensioner Front- (Passenger) Resistance too High.
B1368 Tensioner Front- (Passenger) Resistance too Low.
B1369 Tensioner Front- (Passenger) Resistance chain. Zakoroch. to the ground
B1370 Tensioner Front- (Passenger) Resistance chain. Zakoroch. on the battery
B1378 Air bag of the sides. Front- (Driver) Resistance too High.
B1379 Air bag of the sides. Front- (Driver) Resistance too Low.
B1380 Air bag of the sides. Front- (Driver) Resistance chain. Zakoroch. to the ground
B1381 Air bag of the sides. Front- (Driver) Resistance chain. Zakoroch. on the battery
B1382 Air bag of the sides. Front- (Passenger) Resistance too High.
B1383 Air cushion of the sides. Front- (Passenger) Resistance too Low.
B1384 Air bag of the sides. Front- (Passenger) Chain resistance. Zakoroch. to the ground
B1385 Air bag of the sides. Front- (Passenger) Chain resistance. Zakoroch. on the battery

B1395 Error installing Ignition Circuits
B1400 SIS (Side Impact Sensor) Front- (Driver) Defect
B1403 SIS (Side Impact Sensor) Front- (Passenger) Defect
B1409 SIS (Side Impact Sensor) Front- (Driver) Communication error
B1410 SIS (Side Impact Sensor) Front- (Passenger) Communication error
B1414 SIS (Side Impact Sensor) Front- (Driver) Invalid ID
B1415 SIS (Side Impact Sensor) Front- (Passenger) Invalid ID
B1473 Inflatable add. air. pillow Front- (Driver) Resistance too High.
B1474 Inflatable add. air. cushion Front- (Driver) Resistance too Low.
B1475 Inflatable add. air. pillow Front- (Driver) Chain resistance. Zakoroch. to the ground
B1476 Inflatable add. air. pillow Front- (Driver) Chain resistance. Zakoroch. on the battery
B1477 Inflatable extra. air. pillow Front- (Passenger) Resistance too High.
B1478 Inflatable add. air. pillow Front- (Passenger) Resistance too Low.
B1479 Inflatable add. air. pillow Front- (Passenger) Chain resistance. Zakoroch. to the ground
B1480 Inflatable extra. air. pillow Front- (Passenger) Chain resistance. Zakoroch. on the battery
B1527 Passenger airbag deactivation switch Open. or Zakoroch. on the battery
B1528 Passenger airbag deactivation switch. or Zakoroch. to the ground
B1529 Passenger Airbag Deactivation Deactivation Switch
B1620 Internal error- Replace SRSCM
B1649 Collision recorded – Inverting vehicle (replace ECU)
B1650 Collision recorded only in the 1st stage (Frontal-replace SRSCM)
B1651 The collision is recorded in the front-on driver’s side-air. cushion (replace SRSCM)
B1652 Collision recorded in the front-passenger side, air. cushion (replace SRSCM)
B1683 Exceed Maximum Coding Number
B1684 ACU Configuration is different
B1730 Driver’s seat belt tensioner resistance too high
B1731 Driver’s seat belt tensioner resistance too low
B1732 Short to ground in the driver’s seat belt tensioner chain
B1733 Battery short circuit in driver’s seat belt tensioner circuit
B1762 ACU Coding Error
B2500 Warning Lamp – Failure
B2505 Failure of the deactivation warning light. passenger pillows

2011> D 2.0 TCI-R> Body Control> Body Control Module

B1214 Rear Left Sensor Fault
B1215 Rear Center Left Sensor Fault
B1216 Rear Center Right Sensor Fault
B1217 Rear Right Sensor Fault
B1602 CAN error
B1603 CAN channel off.
B1613 CAN, timeout between IPM and CLUs
B1690 CAN, timeout between IPM and SJB

2011> D 2.0 TCI-R> Body Control> Smart Junction Box

B1602 CAN error
B1603 CAN-OFF channel.
B2351 SCG reverse lights
B2352 SCG left individual fire DRL
B2353 SCG right-hand single fire DRL
B2510 Right Headlamp High Circuit Short to Ground
B2511 Left Headlamp High Circuit Short to Ground
B2512 Right Headlamp Low Circuit Short to Ground
B2513 Left Headlamp Low Circuit Short to Ground
B2514 Right side light, short circuit to earth
B2515 Left parking light, short circuit to earth
B2516 Front fog lamp, short to ground
B2517 Indicator of parking lights, short circuit to earth

2011> D 2.0 TCI-R> Brake> Electronic Stability Program

C1101 Battery voltage High.
C1102 Battery voltage Low.
C1112 Sensor source voltage
C1200 Wheel speed sensor Front-LH Open / Closed.
C1201 Wheel speed sensor Front-LH Range / Characteristics / Interrupt.
C1202 Wheel speed sensor Front-LH Incorrect / no signal
C1203 Wheel speed sensor Front-RH Open / Closed.
C1204 Wheel speed sensor Front-RH Range / Characteristics / Interrupt.
C1205 Wheel speed sensor Front-RH Invalid / no signal
C1206 Wheel speed sensor Rear-LH Open / Close.
C1207 Wheel Speed ​​Sensor Rear-LH Range / Characteristics / Interrupt.
C1208 Wheel speed sensor Rear-LH Incorrect / no signal
C1209 Wheel speed sensor Rear-RH Open / Close.
C1210 Wheel speed sensor Rear-RH Range / Characteristics / Interrupt.
C1211 Wheel speed sensor Rear-RH Incorrect / no signal
C1235 Primary pressure sensor – El. chain
C1237 Primary Pressure Transmitter – Signal
C1260 Steering Angle Sensor Circuit-Signal
C1261 Wheel Angle Sensor – Not Calibrated
C1274 Longitudinal G sensor open / short
C1275 Range error / Sensor characteristics longitudinal. accelerating
C1282 Car steering sensor around vert. axis and transversely. acceleration – Electr.
C1283 Vehicle turn signal sensor around the vertical. axis and transversely. Acceleration – Signal
C1285 Sensor unit, detected change / violation of calibration
C1503 TCS / ESP Switching. Error
C1513 Brake switch error
C1520 Clutch switch
C1526 HDC SWITCH ERROR
C1527 Collision data saved
C1604 ECU Hardware Error
C1605 CAN Hardware error
C1611 CAN time-out ECM
C1612 CAN time-out TCM
C1613 CAN Invalid message
C1616 CAN channel off.
C1623 CAN time-out Steering angle sensor
C1627 CAN time-out 4WD
C1647 CAN HARDWARE ERROR – SENSOR CHANNEL
C1687 CAN, MDPS timeout
C1688 MDPS Signal Error
C1702 Encoding error option
C2112 Electronic relay error
C2130 Brake Relay Lamp Error
C2227 Excessive temperature of the brake disc
C2380 ABS / TCS / ESP valve error
C2402 Electr. motor

2011> D 2.0 TCI-R> Driveshaft> 4WD Control

P0602 Control Module Programming Error
P1779 No power supply
P1780 High Battery Voltage
P1781 Battery voltage Low.
P1820 4WD CAN signal error or communication error
P1821 CAN signal 4WD error or communication error
P1822 4WD CAN signal error or communication error
P1823 CAN alarm 4WD or communication error
P1824 4WD CAN signal error or communication error
P1825 CAN alarm 4WD or communication error
P1826 CAN alarm 4WD or communication error
P1827 4WD CAN signal error or communication error
P1828 CAN alarm 4WD or communication error
P1829 Upper tolerance limit for clutch torque
P1830 Clutch torque lower limit
P1831 Thermal overload warning of clutch
P1832 Shutdown warning due to thermal clutch overload
P1833 Thermal overload warning of drive
P1834 Shutdown warning due to thermal overload of the drive
P1835 4WD CAN signal error or communication error
P1836 Pressure Relief Check Error
P1837 Variant encoding of vehicle is not detected
U0001 High Speed ​​CAN Communication Bus off
U0100 Loss of communication with ECM / PCM ‘A’
U0101 Loss of communication with TCM
U0121 Communication loss with ABS control module
U0122 Lost Communication With Vehicle Dynamics Control Module
U0126 Steering angle signal fault
U1121 Loss of communication with the electronic stability program module

2011> D 2.0 TCI-R> Engine> High Power (CPF +)

Loading …

2011> D 2.0 TCI-R> Immobilizer> Immobilizer

P1610 EMS without immobilizer option connected to immobilizer
P1674 Immobilizer-Transponder status Error
P1675 Immobilizer-Transponder Programming Error
P1676 Immobilizer-Smartra Message Error
P1690 Immobilizer-Smartra No Response
P1691 Immobilizer-Antenna Coil Error
P1692 Immobilizer: Indicator lamp error
P1693 Immobilizer – Transmitter error
P1694 Immobilizer-EMS Message Error
P1695 Immobilizer-EMS Memory Error
P1696 / P1689 Immobilizer-Authentication Fail
P1699 Immobilizer – Double attempt was repeated
P169A Immobilizer-SMARTRA Authentication Fail

2011> D 2.0 TCI-R> Smart Key> Smart Key Code Saving

P1676 Immobilizer-Smartra Message Error
P1690 Immobilizer-Smartra No Response
P1695 Immobilizer-EMS Memory Error
P1696 Immobilizer-Authentication Fail
P1699 Immobilizer – Double attempt was repeated

2011> D 2.0 TCI-R> Smart Key> Smart Key Unit

B1602 CAN BUS Physical Error
B1603 CAN channel off.
B1604 Loss of communication between BCM and IFU
B1609 CAN, the timeout between SMK and SJB
B1613 CAN, timeout between SMK and CLUs
B1625 ECM COMMUNICATION DATA FAILURE
B1971 Positions 5 ‘Parking’ – Input error
B1978 Electronic steering column lock (ESCL), malfunction
B1987 Internal microprocessor, error
B1988 ESCL, power circuit, short to battery
B1989 ESCL, ground circuit, short circuit to battery
B1990 ESCL, power circuit, short to ground
B1991 BCM: Low. voltage / Lin Communication line (Tx)
B2120 SMK, IGN1 control output fault

2011> D 2.0 TCI-R> Steering> Power Steering

C1101 High Battery Voltage
C1102 Battery voltage Low.
C1109 Ignition Circuit Open
C1112 Sensor supply voltage failure
C1259 Steering Angle Sensor – Electrical Malfunction
C1261 Wheel Angle Sensor – Not Calibrated
C1290 Torque sensor main signal fail
C1603 ECU thermal protection
C1604 ECU Hardware Error
C1611 CAN time-out ECM
C1612 CAN time-out TCM
C1616 CAN channel off.
C1622 EMS invalid vehicle speed
C1628 CAN Timeout – Cluster
C1646 CAN Message Failure – TCU
C1656 Internal vehicle RF source e.g. scanner
C1692 CAN, timeout exceeded VSM
C1693 CAN, VSM signal error
C1696 SPAS time out
C1697 CAN, SPAS message error
C1702 Encoding error option
C1704 ECU Fault Relay Failure
C2401 Motor circuit
C2412 Motor Closed. or Open.
C2413 Motor current fail (current over)

2011> D 2.0 TCI-R> Transmission> Automatic Transaxle

P0601 Internal control unit Checksum error
P0705 Transmission Range Sensor Circuit Malfunction
P0706 Transmission Range Sensor Circuit Range / Performance
P0712 Chain LR Sensor0RemperatureRtransmission9Fig. 8 ‘A’ Low. at the entrance
P0713 Chain LR Sensor0RemperatureKtransmission9Fig. 8 ‘A’ High. at the entrance
P0717 Input / Turbine Speed ​​Sensor ‘A’ Circuit No Signal
P0722 Output Speed ​​Sensor Circuit No Signal
P0729 Gear 6 Incorrect Ratio
P0731 Transmit 1 Wrong relationship
P0732 Transmission 2 Wrong relationship
P0733 Transmission 3 Wrong relationship
P0734 Transmission 4 Wrong relationship
P0735 Transmission 5 Wrong relationship
P0741 Torque Converter Clutch Circuit Performance or Stuck Off
P0743 Torque converter coupling Electrical circuit
P0748 Pressure Control Solenoid Valve (VFS) ‘A’ Electrical
P0753 Collision data saved
P0758 Shift solenoid valve “B” (clutch 2-6 gears / brake)
P0763 The solenoid valve “C” of the shift control (35R / coupling lock GT)
P0768 Collision data saved
P0773 Rear airbag Passenger circuit short to Battery
P0880 TCM Power Signal Error Open / Short (GND)
P0955 Manual mode in automatic transmission, circuit failure
P2709 Mass or Volume Air Flow ‘B’ Circuit High Input
U0001 High Speed ​​CAN Communication Bus off
U0100 Loss of communication with ECM / PCM ‘A’

2011> D 2.0 TCI-R (Low power)> Air Conditioner> Dual auto (DCC)

B1204 Air mixture Potentiometer Open (Low) – Passenger
B1205 Air mixture Potentiometer Tight. (High.) – Passenger
B1208 Input potentiometer Open (Low)
B1209 Input potentiometer Short. (High.)
B1233 Temperature sensor inside the compartment. (Low)
B1234 Interior temperature sensor Open (High.)
B1237 Ambient temperature sensor (Low)
B1238 Ambient Temperature Sensor Open (High.)
B1241 Vapor Sensor (Low)
B1242 Vapor Sensor Open (High.)
B1245 Air mixture Potentiometer Open (Low) – (Driver)
B1246 Air mixture Potentiometer Tight. (High.) – (Driver)
B1249 Direction potentiometer Open (Low) – (Driver)
B1250 Directional potentiometer. (High.) – (Driver)
B1672 APT Sensor Fault – CAN Signal
B1685 Engine RPM fault – CAN Signal
B1686 Vehicle Speed ​​Sensor Fault – CAN Signal
B1687 Engine Coolant Temperature Sensor Circuit – CAN Signal
B1688 Cluster Ionizer Fault
B2406 Air mixture Motor – (Driver)
B2408 Engine intake system
B2409 Motor Control Flows – (Driver)
B2415 Air mixture Motor vehicle. doors – (Passenger)

2011> D 2.0 TCI-R (Low power)> Airbag> DELPHI

B1101 Battery voltage High.
B1102 Low battery voltage
B1328 FIS (Front Impact Sensor) – (Driver) Defect
B1329 FIS (Front Impact Sensor) – (Driver) Communication error
B1330 FIS (Front Impact Sensor) – (Driver) Invalid ID
B1333 FIS (Front Impact Sensor) – (Passenger) Defect
B1334 FIS (Front Impact Sensor) – (Passenger) Communication error
B1335 FIS (Front Impact Sensor) – (Passenger) Invalid ID
B1346 Driver’s air cushion resistance too High. (1st stage)
B1347 Driver air cushion resistance too low. (1st stage)
B1348 Resistance of the driver air bag. on the ground (1st stage)
B1349 Resistance of the driver air bag. on the battery (stage 1)
B1352 Passenger airbag resistance too high. (1st stage)
B1353 Passenger airbag resistance too low. (1st stage)
B1354 Passenger airbag resistance circuit. on the ground (1st stage)
B1355 Passenger airbag resistance circuit. on the battery (stage 1)
B1361 Tensioner Front- (Driver) Resistance too High.
B1362 Tensioner Front- (Driver) Resistance too Low.
B1363 Tensioner Front- (Driver) Resistance chain. Zakoroch. to the ground
B1364 Tensioner Front- (Driver) Resistance chain. Zakoroch. on the battery
B1367 Tensioner Front- (Passenger) Resistance too High.
B1368 Tensioner Front- (Passenger) Resistance too Low.
B1369 Tensioner Front- (Passenger) Resistance chain. Zakoroch. to the ground
B1370 Tensioner Front- (Passenger) Resistance chain. Zakoroch. on the battery
B1378 Air bag of the sides. Front- (Driver) Resistance too High.
B1379 Air bag of the sides. Front- (Driver) Resistance too Low.
B1380 Air bag of the sides. Front- (Driver) Resistance chain. Zakoroch. to the ground
B1381 Air bag of the sides. Front- (Driver) Resistance chain. Zakoroch. on the battery
B1382 Air bag of the sides. Front- (Passenger) Resistance too High.
B1383 Air cushion of the sides. Front- (Passenger) Resistance too Low.
B1384 Air bag of the sides. Front- (Passenger) Chain resistance. Zakoroch. to the ground
B1385 Air bag of the sides. Front- (Passenger) Chain resistance. Zakoroch. on the battery
B1395 Error installing Ignition Circuits
B1400 SIS (Side Impact Sensor) Front- (Driver) Defect
B1403 SIS (Side Impact Sensor) Front- (Passenger) Defect
B1409 SIS (Side Impact Sensor) Front- (Driver) Communication error
B1410 SIS (Side Impact Sensor) Front- (Passenger) Communication error
B1414 SIS (Side Impact Sensor) Front- (Driver) Invalid ID
B1415 SIS (Side Impact Sensor) Front- (Passenger) Invalid ID
B1473 Inflatable add. air. pillow Front- (Driver) Resistance too High.
B1474 Inflatable add. air. cushion Front- (Driver) Resistance too Low.
B1475 Inflatable add. air. pillow Front- (Driver) Chain resistance. Zakoroch. to the ground
B1476 Inflatable add. air. pillow Front- (Driver) Chain resistance. Zakoroch. on the battery
B1477 Inflatable extra. air. pillow Front- (Passenger) Resistance too High.
B1478 Inflatable add. air. pillow Front- (Passenger) Resistance too Low.
B1479 Inflatable add. air. pillow Front- (Passenger) Chain resistance. Zakoroch. to the ground
B1480 Inflatable extra. air. pillow Front- (Passenger) Chain resistance. Zakoroch. on the battery
B1527 Passenger airbag deactivation switch Open. or Zakoroch. on the battery
B1528 Passenger airbag deactivation switch. or Zakoroch. to the ground
B1529 Passenger Airbag Deactivation Deactivation Switch
B1620 Internal error- Replace SRSCM
B1649 Collision recorded – Inverting vehicle (replace ECU)
B1650 Collision recorded only in the 1st stage (Frontal-replace SRSCM)
B1651 The collision is recorded in the front-on driver’s side-air. cushion (replace SRSCM)
B1652 Collision recorded in the front-passenger side, air. cushion (replace SRSCM)
B1683 Exceed Maximum Coding Number
B1684 ACU Configuration is different
B1730 Driver’s seat belt tensioner resistance too high
B1731 Driver’s seat belt tensioner resistance too low
B1732 Short to ground in the driver’s seat belt tensioner chain
B1733 Battery short circuit in driver’s seat belt tensioner circuit
B1762 ACU Coding Error
B2500 Warning Lamp – Failure
B2505 Failure of the deactivation warning light. passenger pillows

2011> D 2.0 TCI-R (Low power)> BCM (Body Control Module)> Body Control Module

B1214 Rear Left Sensor Fault
B1215 Rear Center Left Sensor Fault
B1216 Rear Center Right Sensor Fault
B1217 Rear Right Sensor Fault
B1602 CAN error
B1603 CAN channel off.
B1613 CAN, timeout between IPM and CLUs
B1690 CAN, timeout between IPM and SJB

2011> D 2.0 TCI-R (Low power)> BCM (Body Control Module)> Smart Junction Box

B1602 CAN error
B1603 CAN-OFF channel.
B2351 SCG reverse lights
B2352 SCG left individual fire DRL
B2353 SCG right-hand single fire DRL
B2510 Right Headlamp High Circuit Short to Ground
B2511 Left Headlamp High Circuit Short to Ground
B2512 Right Headlamp Low Circuit Short to Ground
B2513 Left Headlamp Low Circuit Short to Ground
B2514 Right side light, short circuit to earth
B2515 Left parking light, short circuit to earth
B2516 Front fog lamp, short to ground
B2517 Indicator of parking lights, short circuit to earth

2011> D 2.0 TCI-R (Low power)> Brake> ESP (Mando)

C1101 Battery voltage High.
C1102 Battery voltage Low.
C1112 Sensor source voltage
C1200 Wheel speed sensor Front-LH Open / Closed.
C1201 Wheel speed sensor Front-LH Range / Characteristics / Interrupt.
C1202 Wheel speed sensor Front-LH Incorrect / no signal
C1203 Wheel speed sensor Front-RH Open / Closed.
C1204 Wheel speed sensor Front-RH Range / Characteristics / Interrupt.
C1205 Wheel speed sensor Front-RH Invalid / no signal
C1206 Wheel speed sensor Rear-LH Open / Close.
C1207 Wheel Speed ​​Sensor Rear-LH Range / Characteristics / Interrupt.
C1208 Wheel speed sensor Rear-LH Incorrect / no signal
C1209 Wheel speed sensor Rear-RH Open / Close.
C1210 Wheel speed sensor Rear-RH Range / Characteristics / Interrupt.
C1211 Wheel speed sensor Rear-RH Incorrect / no signal
C1235 Primary pressure sensor – El. chain
C1237 Primary Pressure Transmitter – Signal
C1260 Steering Angle Sensor Circuit-Signal
C1261 Wheel Angle Sensor – Not Calibrated
C1274 Longitudinal G sensor open / short
C1275 Range error / Sensor characteristics longitudinal. accelerating
C1282 Car steering sensor around vert. axis and transversely. acceleration – Electr.
C1283 Vehicle turn signal sensor around the vertical. axis and transversely. Acceleration – Signal
C1285 Sensor unit, detected change / violation of calibration
C1503 TCS / ESP Switching. Error
C1513 Brake switch error
C1520 Clutch switch
C1526 HDC SWITCH ERROR
C1527 Collision data saved
C1604 ECU Hardware Error
C1605 CAN Hardware error
C1611 CAN time-out ECM
C1612 CAN time-out TCM
C1613 CAN Invalid message
C1616 CAN channel off.
C1623 CAN time-out Steering angle sensor
C1627 CAN time-out 4WD
C1647 CAN HARDWARE ERROR – SENSOR CHANNEL
C1687 CAN, MDPS timeout
C1688 MDPS Signal Error
C1702 Encoding error option
C2112 Electronic relay error
C2130 Brake Relay Lamp Error
C2227 Excessive temperature of the brake disc
C2380 ABS / TCS / ESP valve error
C2402 Electr. motor

2011> D 2.0 TCI-R (Low power)> Driveshaft> 4WD

P0602 Control Module Programming Error
P1779 No power supply
P1780 High Battery Voltage
P1781 Battery voltage Low.
P1820 4WD CAN signal error or communication error
P1821 CAN signal 4WD error or communication error
P1822 4WD CAN signal error or communication error
P1823 CAN alarm 4WD or communication error
P1824 4WD CAN signal error or communication error
P1825 CAN alarm 4WD or communication error
P1826 CAN alarm 4WD or communication error
P1827 4WD CAN signal error or communication error
P1828 CAN alarm 4WD or communication error
P1829 Upper tolerance limit for clutch torque
P1830 Clutch torque lower limit
P1831 Thermal overload warning of clutch
P1832 Shutdown warning due to thermal clutch overload
P1833 Thermal overload warning of drive
P1834 Shutdown warning due to thermal overload of the drive
P1835 4WD CAN signal error or communication error
P1836 Pressure Relief Check Error
P1837 Variant encoding of vehicle is not detected
U0001 High Speed ​​CAN Communication Bus off
U0100 Loss of communication with ECM / PCM ‘A’
U0101 Loss of communication with TCM
U0121 Communication loss with ABS control module
U0122 Lost Communication With Vehicle Dynamics Control Module
U0126 Steering angle signal fault
U1121 Loss of communication with the electronic stability program module

2011> D 2.0 TCI-R (Low power)> Engine> D 2.0 TCI-R (Low power)

Loading …

2011> D 2.0 TCI-R (Low power)> Immobilizer> IMMO (Bosch)

P1610 EMS without immobilizer option connected to immobilizer
P1674 Immobilizer-Transponder status Error
P1675 Immobilizer-Transponder Programming Error
P1676 Immobilizer-Smartra Message Error
P1690 Immobilizer-Smartra No Response
P1691 Immobilizer-Antenna Coil Error
P1692 Immobilizer: Indicator lamp error
P1693 Immobilizer – Transmitter error
P1694 Immobilizer-EMS Message Error
P1695 Immobilizer-EMS Memory Error
P1696 / P1689 Immobilizer-Authentication Fail
P1699 Immobilizer – Double attempt was repeated
P169A Immobilizer-SMARTRA Authentication Fail

2011> D 2.0 TCI-R (Low power)> Steering> Motor driven Power Steering (Koyo)

C1101 High Battery Voltage
C1102 Battery voltage Low.
C1109 Ignition Circuit Open
C1112 Sensor supply voltage failure
C1259 Steering Angle Sensor – Electrical Malfunction
C1261 Wheel Angle Sensor – Not Calibrated
C1290 Torque sensor main signal fail
C1603 ECU thermal protection
C1604 ECU Hardware Error
C1611 CAN time-out ECM
C1612 CAN time-out TCM
C1616 CAN channel off.
C1622 EMS invalid vehicle speed
C1628 CAN Timeout – Cluster
C1646 CAN Message Failure – TCU
C1656 Internal vehicle RF source e.g. scanner
C1692 CAN, timeout exceeded VSM
C1693 CAN, VSM signal error
C1696 SPAS time out
C1697 CAN, SPAS message error
C1702 Encoding error option
C1704 ECU Fault Relay Failure
C2401 Motor circuit
C2412 Motor Closed. or Open.
C2413 Motor current fail (current over)

2011> D 2.0 TCI-R (Low power)> Transmission> A6LF2

P0601 Internal control unit Checksum error
P0705 Transmission Range Sensor Circuit Malfunction
P0706 Transmission Range Sensor Circuit Range / Performance
P0712 Chain LR Sensor0RemperatureRtransmission9Fig. 8 ‘A’ Low. at the entrance
P0713 Chain LR Sensor0RemperatureKtransmission9Fig. 8 ‘A’ High. at the entrance
P0717 Input / Turbine Speed ​​Sensor ‘A’ Circuit No Signal
P0722 Output Speed ​​Sensor Circuit No Signal
P0729 Gear 6 Incorrect Ratio
P0731 Transmit 1 Wrong relationship
P0732 Transmission 2 Wrong relationship
P0733 Transmission 3 Wrong relationship
P0734 Transmission 4 Wrong relationship
P0735 Transmission 5 Wrong relationship
P0741 Torque Converter Clutch Circuit Performance or Stuck Off
P0743 Torque converter coupling Electrical circuit
P0748 Pressure Control Solenoid Valve (VFS) ‘A’ Electrical
P0753 Collision data saved
P0758 Shift solenoid valve “B” (clutch 2-6 gears / brake)
P0763 The solenoid valve “C” of the shift control (35R / coupling lock GT)
P0768 Collision data saved
P0773 Rear airbag Passenger circuit short to Battery
P0880 TCM Power Signal Error Open / Short (GND)
P0955 Manual mode in automatic transmission, circuit failure
P2709 Mass or Volume Air Flow ‘B’ Circuit High Input
U0001 High Speed ​​CAN Communication Bus off
U0100 Loss of communication with ECM / PCM ‘A’

2011> G 2.0 DOHC> Air Conditioner> Air Conditioner

B1204 Air mixture Potentiometer Open (Low) – Passenger
B1205 Air mixture Potentiometer Tight. (High.) – Passenger
B1208 Input potentiometer Open (Low)
B1209 Input potentiometer Short. (High.)
B1233 Temperature sensor inside the compartment. (Low)
B1234 Interior temperature sensor Open (High.)
B1237 Ambient temperature sensor (Low)
B1238 Ambient Temperature Sensor Open (High.)
B1241 Vapor Sensor (Low)
B1242 Vapor Sensor Open (High.)
B1245 Air mixture Potentiometer Open (Low) – (Driver)
B1246 Air mixture Potentiometer Tight. (High.) – (Driver)
B1249 Direction potentiometer Open (Low) – (Driver)
B1250 Directional potentiometer. (High.) – (Driver)
B1672 APT Sensor Fault – CAN Signal
B1685 Engine RPM fault – CAN Signal
B1686 Vehicle Speed ​​Sensor Fault – CAN Signal
B1687 Engine Coolant Temperature Sensor Circuit – CAN Signal
B1688 Cluster Ionizer Fault
B2406 Air mixture Motor – (Driver)
B2408 Engine intake system
B2409 Motor Control Flows – (Driver)
B2415 Air mixture Motor vehicle. doors – (Passenger)

2011> G 2.0 DOHC> Airbag> Airbag (Event # 1)

B1101 Battery voltage High.
B1102 Low battery voltage
B1328 FIS (Front Impact Sensor) – (Driver) Defect
B1329 FIS (Front Impact Sensor) – (Driver) Communication error
B1330 FIS (Front Impact Sensor) – (Driver) Invalid ID
B1333 FIS (Front Impact Sensor) – (Passenger) Defect
B1334 FIS (Front Impact Sensor) – (Passenger) Communication error
B1335 FIS (Front Impact Sensor) – (Passenger) Invalid ID
B1346 Driver’s air cushion resistance too High. (1st stage)
B1347 Driver air cushion resistance too low. (1st stage)
B1348 Resistance of the driver air bag. on the ground (1st stage)
B1349 Resistance of the driver air bag. on the battery (stage 1)
B1352 Passenger airbag resistance too high. (1st stage)
B1353 Passenger airbag resistance too low. (1st stage)
B1354 Passenger airbag resistance circuit. on the ground (1st stage)
B1355 Passenger airbag resistance circuit. on the battery (stage 1)
B1361 Tensioner Front- (Driver) Resistance too High.
B1362 Tensioner Front- (Driver) Resistance too Low.
B1363 Tensioner Front- (Driver) Resistance chain. Zakoroch. to the ground
B1364 Tensioner Front- (Driver) Resistance chain. Zakoroch. on the battery
B1367 Tensioner Front- (Passenger) Resistance too High.
B1368 Tensioner Front- (Passenger) Resistance too Low.
B1369 Tensioner Front- (Passenger) Resistance chain. Zakoroch. to the ground
B1370 Tensioner Front- (Passenger) Resistance chain. Zakoroch. on the battery
B1378 Air bag of the sides. Front- (Driver) Resistance too High.
B1379 Air bag of the sides. Front- (Driver) Resistance too Low.
B1380 Air bag of the sides. Front- (Driver) Resistance chain. Zakoroch. to the ground
B1381 Air bag of the sides. Front- (Driver) Resistance chain. Zakoroch. on the battery
B1382 Air bag of the sides. Front- (Passenger) Resistance too High.
B1383 Air cushion of the sides. Front- (Passenger) Resistance too Low.
B1384 Air bag of the sides. Front- (Passenger) Chain resistance. Zakoroch. to the ground
B1385 Air bag of the sides. Front- (Passenger) Chain resistance. Zakoroch. on the battery
B1395 Error installing Ignition Circuits
B1400 SIS (Side Impact Sensor) Front- (Driver) Defect
B1403 SIS (Side Impact Sensor) Front- (Passenger) Defect
B1409 SIS (Side Impact Sensor) Front- (Driver) Communication error
B1410 SIS (Side Impact Sensor) Front- (Passenger) Communication error
B1414 SIS (Side Impact Sensor) Front- (Driver) Invalid ID
B1415 SIS (Side Impact Sensor) Front- (Passenger) Invalid ID
B1473 Inflatable add. air. pillow Front- (Driver) Resistance too High.
B1474 Inflatable add. air. cushion Front- (Driver) Resistance too Low.
B1475 Inflatable add. air. pillow Front- (Driver) Chain resistance. Zakoroch. to the ground
B1476 Inflatable add. air. pillow Front- (Driver) Chain resistance. Zakoroch. on the battery

B1477 Inflatable extra. air. pillow Front- (Passenger) Resistance too High.
B1478 Inflatable add. air. pillow Front- (Passenger) Resistance too Low.
B1479 Inflatable add. air. pillow Front- (Passenger) Chain resistance. Zakoroch. to the ground
B1480 Inflatable extra. air. pillow Front- (Passenger) Chain resistance. Zakoroch. on the battery
B1527 Passenger airbag deactivation switch Open. or Zakoroch. on the battery
B1528 Passenger airbag deactivation switch. or Zakoroch. to the ground
B1529 Passenger Airbag Deactivation Deactivation Switch
B1620 Internal error- Replace SRSCM
B1649 Collision recorded – Inverting vehicle (replace ECU)
B1650 Collision recorded only in the 1st stage (Frontal-replace SRSCM)
B1651 The collision is recorded in the front-on driver’s side-air. cushion (replace SRSCM)
B1652 Collision recorded in the front-passenger side, air. cushion (replace SRSCM)
B1683 Exceed Maximum Coding Number
B1684 ACU Configuration is different
B1730 Driver’s seat belt tensioner resistance too high
B1731 Driver’s seat belt tensioner resistance too low
B1732 Short to ground in the driver’s seat belt tensioner chain
B1733 Battery short circuit in driver’s seat belt tensioner circuit
B1762 ACU Coding Error
B2500 Warning Lamp – Failure
B2505 Failure of the deactivation warning light. passenger pillows

2011> G 2.0 DOHC> Body Control> Body Control Module

B1214 Rear Left Sensor Fault
B1215 Rear Center Left Sensor Fault
B1216 Rear Center Right Sensor Fault
B1217 Rear Right Sensor Fault
B1602 CAN error
B1603 CAN channel off.
B1613 CAN, timeout between IPM and CLUs
B1690 CAN, timeout between IPM and SJB

2011> G 2.0 DOHC> Body Control> Smart Junction Box

B1602 CAN error
B1603 CAN-OFF channel.
B2351 SCG reverse lights
B2352 SCG left individual fire DRL
B2353 SCG right-hand single fire DRL
B2510 Right Headlamp High Circuit Short to Ground
B2511 Left Headlamp High Circuit Short to Ground
B2512 Right Headlamp Low Circuit Short to Ground
B2513 Left Headlamp Low Circuit Short to Ground
B2514 Right side light, short circuit to earth
B2515 Left parking light, short circuit to earth
B2516 Front fog lamp, short to ground
B2517 Indicator of parking lights, short circuit to earth

2011> G 2.0 DOHC> Brake> Electronic Stability Program

C1101 Battery voltage High.
C1102 Battery voltage Low.
C1112 Sensor source voltage
C1200 Wheel speed sensor Front-LH Open / Closed.
C1201 Wheel speed sensor Front-LH Range / Characteristics / Interrupt.
C1202 Wheel speed sensor Front-LH Incorrect / no signal
C1203 Wheel speed sensor Front-RH Open / Closed.
C1204 Wheel speed sensor Front-RH Range / Characteristics / Interrupt.
C1205 Wheel speed sensor Front-RH Invalid / no signal
C1206 Wheel speed sensor Rear-LH Open / Close.
C1207 Wheel Speed ​​Sensor Rear-LH Range / Characteristics / Interrupt.
C1208 Wheel speed sensor Rear-LH Incorrect / no signal
C1209 Wheel speed sensor Rear-RH Open / Close.
C1210 Wheel speed sensor Rear-RH Range / Characteristics / Interrupt.
C1211 Wheel speed sensor Rear-RH Incorrect / no signal
C1235 Primary pressure sensor – El. chain
C1237 Primary Pressure Transmitter – Signal
C1260 Steering Angle Sensor Circuit-Signal
C1261 Wheel Angle Sensor – Not Calibrated
C1274 Longitudinal G sensor open / short
C1275 Range error / Sensor characteristics longitudinal. accelerating
C1282 Car steering sensor around vert. axis and transversely. acceleration – Electr.
C1283 Vehicle turn signal sensor around the vertical. axis and transversely. Acceleration – Signal
C1285 Sensor unit, detected change / violation of calibration
C1503 TCS / ESP Switching. Error
C1513 Brake switch error
C1520 Clutch switch
C1526 HDC SWITCH ERROR
C1527 Collision data saved
C1604 ECU Hardware Error
C1605 CAN Hardware error
C1611 CAN time-out ECM
C1612 CAN time-out TCM
C1613 CAN Invalid message
C1616 CAN channel off.
C1623 CAN time-out Steering angle sensor
C1627 CAN time-out 4WD

C1647 CAN HARDWARE ERROR – SENSOR CHANNEL
C1687 CAN, MDPS timeout
C1688 MDPS Signal Error
C1702 Encoding error option
C2112 Electronic relay error
C2130 Brake Relay Lamp Error
C2227 Excessive temperature of the brake disc
C2380 ABS / TCS / ESP valve error
C2402 Electr. motor

2011> G 2.0 DOHC> Driveshaft> 4WD Control

P0602 Control Module Programming Error
P1779 No power supply
P1780 High Battery Voltage
P1781 Battery voltage Low.
P1820 4WD CAN signal error or communication error
P1821 CAN signal 4WD error or communication error
P1822 4WD CAN signal error or communication error
P1823 CAN alarm 4WD or communication error
P1824 4WD CAN signal error or communication error
P1825 CAN alarm 4WD or communication error
P1826 CAN alarm 4WD or communication error
P1827 4WD CAN signal error or communication error
P1828 CAN alarm 4WD or communication error
P1829 Upper tolerance limit for clutch torque
P1830 Clutch torque lower limit
P1831 Thermal overload warning of clutch
P1832 Shutdown warning due to thermal clutch overload
P1833 Thermal overload warning of drive
P1834 Shutdown warning due to thermal overload of the drive
P1835 4WD CAN signal error or communication error
P1836 Pressure Relief Check Error
P1837 Variant encoding of vehicle is not detected
U0001 High Speed ​​CAN Communication Bus off
U0100 Loss of communication with ECM / PCM ‘A’
U0101 Loss of communication with TCM
U0121 Communication loss with ABS control module
U0122 Lost Communication With Vehicle Dynamics Control Module
U0126 Steering angle signal fault
U1121 Loss of communication with the electronic stability program module

2011> G 2.0 DOHC> Engine> Leaded All

P0011 A Camshaft Position-Timing Over-Advanced or System Performance (Bank 1)
P0014 B Camshaft Position – Timing Over-Advanced or System Performance (Bank 1)
P0016 Ratio Crankshaft Position – Camshaft Position (Capacity 1 Sensor A)
P0017 Crankshaft Position – Camshaft Position Correlation (Bank 1 Sensor)
P0030 HO2S Heater Control Circuit (Capacity 1 / Sensor 1)
P0031 HO2S Heater Control Circuit Low. (Capacity 1 / Sensor 1)
P0032 HO2S Heater Control Circuit High. (Capacity 1 / Sensor 1)
P0036 HO2S Heater Control Circuit (Capacity 1 / Sensor 2)
P0037 HO2S Heater Control Circuit Low. (Capacity 1 / Sensor 2)
P0038 HO2S Heater Control Circuit High. (Capacity 1 / Sensor 2)
P0076 Valve solenoid valve circuit at input -Low. (Capacity 1)
P0077 Valve solenoid circuit at the input -High. (Capacity 1)
P0079 Exhaust Valve Control Solenoid Circuit Low (Bank 1)
P0080 Exhaust Valve Control Solenoid Circuit High (Bank 1)
P0106 ​​The collector absolute pressure circuit is barometric. pressure – Range / Characteristics
P0107 The collector absolute pressure circuit is barometric. Low pressure. at the entrance
P0108 The collector absolute pressure circuit is barometric. pressure High. at the entrance
P0111 Intake Air Temperature Sensor Circuit 1 Circuit Range / Characteristics
P0112 Inlet air temperature sensor low circuit input 1
P0113 Intake Air Temperature Sensor Circuit 1 High. at the entrance
P0116 Engine Coolant Temperature Chain Range / Performance
P0117 Engine coolant temperature signal circuit Low. at the entrance
P0118 Engine coolant temperature signal circuit High. at the entrance
P0119 Engine coolant temperature signal circuit Interrupt.
P0121 Throttle LYADatches: OppositeRopadal8Japerek ;. ‘A’ Chain Range / Characteristics
P0122 THROTTLE LAYERS: Setpoints: Ruled 8; ‘A’ Chain Low. at the entrance
P0123 Throttle LYADatches: OppositePopadal8Japerek ;. ‘A’ Chain High. at the entrance
P0125 Insufficient refrigerant temperature for regulation. fuel in a closed cycle
P0128 Refrigerant Thermostat (Temperature below thermostat range)
P0130 Sensor Circuit O2 (Capacity 1 / Sensor 1)
P0131 O2 Sensor Circuit Low. voltage (Capacity 1 / Sensor 1)
P0132 Sensor Circuit O2 High. voltage (Capacity 1 / Sensor 1)
P0133 Sensor Circuit O2 Low Sensitivity (Capacity 1 / Sensor 1)
P0134 Sensor Circuit O2 No Activity Signs Found (Capacity 1 Sensor 1)
P0135 Sensor O2 – Heater circuit (Capacity 1 / Sensor 1)
P0136 O2 sensor circuit (Capacity 1 / Sensor 2)
P0137 O2 Sensor Circuit Low. voltage (Capacity 1 / Sensor 2)
P0138 Sensor Circuit O2 High. voltage (Capacity 1 / Sensor 2)
P0139 Sensor Circuit O2 Low Sensitivity (Capacity 1 / Sensor 2)
P0140 Sensor Circuit O2 No Signs of Activity (Capacity 1 / Sensor 2)
P0170 Fuel balancing (Capacity 1)

P0221 Throttle / Pedal Position Sensor / Switch ‘B’ Circuit Range / Performance
P0222 Throttle LAYERS: The settings of the Span8; ‘B’ Chain Low. at the entrance
P0223 Throttle LAYERS: Range settings 8 Span; ‘B’ The chain is high. at the entrance
P0230 Primary circuit of the fuel pump
P0261 Cylinder 1 Injector circuit Low.
P0262 Cylinder 1 Injector circuit High.
P0264 Cylinder 2 Injector circuit Low.
P0265 Cylinder 2 Injector circuit High.
P0267 Cylinder 3 Injector circuit Low.
P0268 Cylinder 3 Injector circuit High.
P0270 Cylinder 4 Injector circuit Low.
P0271 Cylinder 4 Injector circuit High.
P0300 Ignition misfire detected. / Multiple cylinders
P0301 Cylinder 1-Ignition misfire detected
P0302 Cylinder 2-Ignition misfire detected
P0303 Cylinder 3-Ignition misfire detected
P0304 Cylinder 4-Ignition misfire detected
P0315 Camshaft Position Sensor (CMP) Error
P0326 Knock Sensor Circuit 1 Range / Characteristics (Capacity 1 or Single Sensor)
P0335 Crankshaft Position Sensor Circuit ‘A’
P0336 Crankshaft Position Sensor Circuit ‘A’ Range / Characteristics
P0340 Camshaft Position Sensor ‘A’ Circuit (Single Sensor)
P0341 Camshaft Position Sensor A Circuit Range / Characteristics (Capacity 1)
P0365 Camshaft Position Sensor B Circuit failure (Capacity 1)
P0366 Camshaft Position Sensor ‘B’ Circuit Range / Performance (Bank 1)
P0420 The efficiency of the catalytic system is below the threshold value (Capacity 1)
P0441 Vapor control system Inadequate blowdown flow
P0442 Vapor Control System-Leakage Detected (Low Leakage)
P0444 Vapor Control System – PCSV Valve Circuit Open.
P0445 Vapor Control System – PCSV Valve Circuit Shorted
P0447 Vapor Control System – Ventilation Control Circuit Open.
P0448 Evaporative Emission System – Vent Control Circuit Shorted
P0449 Vapor control system – Fan circuit. valve / electromagnet.
P0451 Vapor Control System- Pressure Sensor Range / Characteristics
P0452 Vapor Control System – Pressure Sensor Low. at the entrance
P0453 Vapor monitoring system – High pressure sensor. at the entrance
P0454 Vapor Control System – Pressure Sensor Interrupt.
P0455 Vapor Control System-Leakage Detected (Large Leakage)
P0456 Vapor Control System-Leak Detected (Very Low Leakage)
P0462 LOOPLOCK sensor0Reflower0 ‘A’ Low. at the entrance
P0463 LOOPPROTECTION OVERLOAD DRAFT 0 ‘A’ High. at the entrance
P0464 Chain LR sensor for thermostat ‘A’ Break.
P0471 ChainLocatorRoistorOfRed Fuel0 ‘A’ Range / Characteristics
P0501 Vehicle speed sensor A Range / Characteristics
P0504 Ratio5Switch P05 brake ‘0 ‘A’ / ‘B’
P0506 Air Control System idling – Speed ​​below expected
P0507 Air control system at idle speed – Rotational speed higher than expected
P0532 Chain LR sensor of the air; Cooling air conditioner; A0 ‘A’ Low. at the entrance
P0533 ChainLR sensor of the air; Cooling air conditioner; A ‘High’. at the entrance
P0551 Power Steering Pressure Sensor / Chain Switch. Range / Characteristics
P0560 Voltage in the system
P0562 System voltage Low.
P0563 Voltage in the system High.
P0564 Cruise control Multi-function input circuit A
P0605 Internal Control Unit ROM Error (Read Only Memory)
P0620 Generator, control circuit
P0625 Generator excitation / F-contact Circuit Low.
P0626 Generator excitation / F-contact High-voltage circuit.
P0630 VIN Not programmable or incompatible with ECM / PCM
P0638 Throttle Actuator Control Range / Performance (Bank 1)
P0642 Sensors: Relay5Pressure5 ‘A’ Circuit Low.
P0643 Sensors: Relay5Pressure5 ‘A’ High Circuit.
P0650 Malfunction Indicator Lamp (MIL) – Control Circuit
P0652 Sensors: Relay5Pressure5 ‘B’ Circuit Low.
P0653 Sensors: Relay5Pressure5 ‘B’ High Circuit.
P0661 IMT valve control circuit Low. (Capacity 1)
P0662 IMT Valve Control Circuit High. (Capacity 1)
P0698 Sensor Reference voltage C Circuit Low.
P0699 Sensor Reference voltage C High voltage circuit.
P06A4 Sensor Reference Voltage ‘D’ Circuit Low
P06A5 Sensor Reference Voltage ‘D’ Circuit High
P0704 Clutch Switch Input Circuit Malfunction
P2004 Intake Manifold Runner Control Stuck Open (Bank 1)
P2006 Intake Manifold Runner Control Stuck Closed (Bank 1)
P2008 Intake Manifold Runner Control Circuit / Open (Bank 1)
P200A Intake Manifold Runner Performance (Bank1)
P2016 Sensor position. channel input / collector / Circuit switch. Low (Capacity 1)
P2017 Sensor position. channel input / collector / Circuit switch. High (Capacity 1)
P2096 Postcatalytic system. fuel balancing is too lax. (Capacity 1)
P2097 System postcatalytic. fuel balancing is too enriched. (Capacity 1)
P2101 Throttle Actuator Control Motor Circuit Range / Performance
P2104 Throttle Actuator Control System – Forced Idle
P2105 Throttle drive system – forced engine shutdown
P2106 Throttle drive system – forced voltage limitation
P2110 Throttle Actuator Control System – Forced Limited RPM
P2118 Throttle Actuator Control Motor Current Range / Performance

P2119 Throttle Actuator Control Throttle Body Range / Performance
P2122 Throttle / Pedal Position Sensor / Switch ‘D’ Circuit Low Input
P2123 Throttle / Pedal Position Sensor / Switch ‘D’ Circuit High Input
P2127 Throttle / Pedal Position Sensor / Switch. ‘E’ Chain Low. at the entrance
P2128 Throttle L / RDeci: Opposite Orientation8 YAPEREC ;. ‘E’ -High. at the entrance
P2138 Throttle / Pedal Position Sensor / Switch. Aspect. Voltage D / E
P2159 Vehicle Speed ​​Sensor ‘B’ Range / Performance (Wheel Speed ​​Sensor)
P2187 The system is too lax. at idle (- Additive) (Capacity 1)
P2188 The system is too enriched. at idle (Capacity 1)
P2191 The system is too lax. at a higher load (Multiple) (Capacity 1)
P2192 The system is too enriched. at a higher load (Capacity 1)
P2195 O2 Sensor Signal Stuck Lean (Bank 1 Sensor 1)
P2196 O2 Sensor Signal Stuck Rich (Bank 1 Sensor 1)
P2237 O2 Sensor Pumping Current Circuit / Open (Bank 1 Sensor 1)
P2243 O2 Sensor Reference Voltage Circuit / Open (Bank 1 Sensor 1)
P2251 O2 Sensor Reference Ground Circuit / Open (Bank 1 Sensor 1)
P2270 O2 Sensor Signal Stuck Lean (Bank 1 Sensor 2)
P2271 O2 Sensor Signal Stuck Rich (Bank 1 Sensor 2)
P2297 O2 Sensor Out of Range During Deceleration – Bank 1 Sensor 1
P2414 O2 Sensor Exhaust Sample Error (Bank 1 Sensor 1)
P2501 EPMD, voltage tolerance
P2502 Charging System Voltage
P2503 No battery charging
P2610 ECM / PCM Internal shutdown timer
P2626 O2 Sensor Pumping Current Trim Circuit / Open (Bank 1 Sensor 1)
U0001 High Speed ​​CAN Communication Bus off
U0101 Loss of communication with TCM
U1111 Battery sensor, fault (detected by the computer)

2011> G 2.0 DOHC> Engine> Unleaded EOBD

P0011 A Camshaft Position-Timing Over-Advanced or System Performance (Bank 1)
P0014 B Camshaft Position – Timing Over-Advanced or System Performance (Bank 1)
P0016 Ratio Crankshaft Position – Camshaft Position (Capacity 1 Sensor A)
P0017 Crankshaft Position – Camshaft Position Correlation (Bank 1 Sensor)
P0030 HO2S Heater Control Circuit (Capacity 1 / Sensor 1)
P0031 HO2S Heater Control Circuit Low. (Capacity 1 / Sensor 1)
P0032 HO2S Heater Control Circuit High. (Capacity 1 / Sensor 1)
P0036 HO2S Heater Control Circuit (Capacity 1 / Sensor 2)
P0037 HO2S Heater Control Circuit Low. (Capacity 1 / Sensor 2)
P0038 HO2S Heater Control Circuit High. (Capacity 1 / Sensor 2)
P0076 Valve solenoid valve circuit at input -Low. (Capacity 1)
P0077 Valve solenoid circuit at the input -High. (Capacity 1)
P0079 Exhaust Valve Control Solenoid Circuit Low (Bank 1)
P0080 Exhaust Valve Control Solenoid Circuit High (Bank 1)
P0106 ​​The collector absolute pressure circuit is barometric. pressure – Range / Characteristics
P0107 The collector absolute pressure circuit is barometric. Low pressure. at the entrance
P0108 The collector absolute pressure circuit is barometric. pressure High. at the entrance
P0111 Intake Air Temperature Sensor Circuit 1 Circuit Range / Characteristics
P0112 Inlet air temperature sensor low circuit input 1
P0113 Intake Air Temperature Sensor Circuit 1 High. at the entrance
P0116 Engine Coolant Temperature Chain Range / Performance
P0117 Engine coolant temperature signal circuit Low. at the entrance
P0118 Engine coolant temperature signal circuit High. at the entrance
P0119 Engine coolant temperature signal circuit Interrupt.
P0121 Throttle LYADatches: OppositeRopadal8Japerek ;. ‘A’ Chain Range / Characteristics
P0122 THROTTLE LAYERS: Setpoints: Ruled 8; ‘A’ Chain Low. at the entrance
P0123 Throttle LYADatches: OppositePopadal8Japerek ;. ‘A’ Chain High. at the entrance
P0125 Insufficient refrigerant temperature for regulation. fuel in a closed cycle
P0128 Refrigerant Thermostat (Temperature below thermostat range)
P0130 Sensor Circuit O2 (Capacity 1 / Sensor 1)
P0131 O2 Sensor Circuit Low. voltage (Capacity 1 / Sensor 1)
P0132 Sensor Circuit O2 High. voltage (Capacity 1 / Sensor 1)
P0133 Sensor Circuit O2 Low Sensitivity (Capacity 1 / Sensor 1)
P0134 Sensor Circuit O2 No Activity Signs Found (Capacity 1 Sensor 1)
P0135 Sensor O2 – Heater circuit (Capacity 1 / Sensor 1)

P0136 O2 sensor circuit (Capacity 1 / Sensor 2)
P0137 O2 Sensor Circuit Low. voltage (Capacity 1 / Sensor 2)
P0138 Sensor Circuit O2 High. voltage (Capacity 1 / Sensor 2)
P0139 Sensor Circuit O2 Low Sensitivity (Capacity 1 / Sensor 2)
P0140 Sensor Circuit O2 No Signs of Activity (Capacity 1 / Sensor 2)
P0170 Fuel balancing (Capacity 1)
P0221 Throttle / Pedal Position Sensor / Switch ‘B’ Circuit Range / Performance
P0222 Throttle LAYERS: The settings of the Span8; ‘B’ Chain Low. at the entrance
P0223 Throttle LAYERS: Range settings 8 Span; ‘B’ The chain is high. at the entrance
P0230 Primary circuit of the fuel pump
P0261 Cylinder 1 Injector circuit Low.
P0262 Cylinder 1 Injector circuit High.
P0264 Cylinder 2 Injector circuit Low.
P0265 Cylinder 2 Injector circuit High.
P0267 Cylinder 3 Injector circuit Low.
P0268 Cylinder 3 Injector circuit High.
P0270 Cylinder 4 Injector circuit Low.
P0271 Cylinder 4 Injector circuit High.
P0300 Ignition misfire detected. / Multiple cylinders
P0301 Cylinder 1-Ignition misfire detected
P0302 Cylinder 2-Ignition misfire detected
P0303 Cylinder 3-Ignition misfire detected
P0304 Cylinder 4-Ignition misfire detected
P0315 Camshaft Position Sensor (CMP) Error
P0326 Knock Sensor Circuit 1 Range / Characteristics (Capacity 1 or Single Sensor)
P0335 Crankshaft Position Sensor Circuit ‘A’
P0336 Crankshaft Position Sensor Circuit ‘A’ Range / Characteristics
P0340 Camshaft Position Sensor ‘A’ Circuit (Single Sensor)
P0341 Camshaft Position Sensor A Circuit Range / Characteristics (Capacity 1)
P0365 Camshaft Position Sensor B Circuit failure (Capacity 1)
P0366 Camshaft Position Sensor ‘B’ Circuit Range / Performance (Bank 1)
P0420 The efficiency of the catalytic system is below the threshold value (Capacity 1)
P0441 Vapor control system Inadequate blowdown flow
P0442 Vapor Control System-Leakage Detected (Low Leakage)
P0444 Vapor Control System – PCSV Valve Circuit Open.
P0445 Vapor Control System – PCSV Valve Circuit Shorted
P0447 Vapor Control System – Ventilation Control Circuit Open.
P0448 Evaporative Emission System – Vent Control Circuit Shorted
P0449 Vapor control system – Fan circuit. valve / electromagnet.
P0451 Vapor Control System- Pressure Sensor Range / Characteristics
P0452 Vapor Control System – Pressure Sensor Low. at the entrance
P0453 Vapor monitoring system – High pressure sensor. at the entrance
P0454 Vapor Control System – Pressure Sensor Interrupt.
P0455 Vapor Control System-Leakage Detected (Large Leakage)
P0456 Vapor Control System-Leak Detected (Very Low Leakage)
P0462 LOOPLOCK sensor0Reflower0 ‘A’ Low. at the entrance
P0463 LOOPPROTECTION OVERLOAD DRAFT 0 ‘A’ High. at the entrance
P0464 Chain LR sensor for thermostat ‘A’ Break.
P0471 ChainLocatorRoistorOfRed Fuel0 ‘A’ Range / Characteristics
P0501 Vehicle speed sensor A Range / Characteristics
P0504 Ratio5Switch P05 brake ‘0 ‘A’ / ‘B’
P0506 Air Control System idling – Speed ​​below expected
P0507 Air control system at idle speed – Rotational speed higher than expected
P0532 Chain LR sensor of the air; Cooling air conditioner; A0 ‘A’ Low. at the entrance
P0533 ChainLR sensor of the air; Cooling air conditioner; A ‘High’. at the entrance
P0551 Power Steering Pressure Sensor / Chain Switch. Range / Characteristics
P0560 Voltage in the system
P0562 System voltage Low.
P0563 Voltage in the system High.
P0564 Cruise control Multi-function input circuit A
P0605 Internal Control Unit ROM Error (Read Only Memory)
P0620 Generator, control circuit
P0625 Generator excitation / F-contact Circuit Low.
P0626 Generator excitation / F-contact High-voltage circuit.
P0630 VIN Not programmable or incompatible with ECM / PCM
P0638 Throttle Actuator Control Range / Performance (Bank 1)
P0642 Sensors: Relay5Pressure5 ‘A’ Circuit Low.

P0643 Sensors: Relay5Pressure5 ‘A’ High Circuit.
P0650 Malfunction Indicator Lamp (MIL) – Control Circuit
P0652 Sensors: Relay5Pressure5 ‘B’ Circuit Low.
P0653 Sensors: Relay5Pressure5 ‘B’ High Circuit.
P0661 IMT valve control circuit Low. (Capacity 1)
P0662 IMT Valve Control Circuit High. (Capacity 1)
P0698 Sensor Reference voltage C Circuit Low.
P0699 Sensor Reference voltage C High voltage circuit.
P06A4 Sensor Reference Voltage ‘D’ Circuit Low
P06A5 Sensor Reference Voltage ‘D’ Circuit High
P0704 Clutch Switch Input Circuit Malfunction
P2004 Intake Manifold Runner Control Stuck Open (Bank 1)
P2006 Intake Manifold Runner Control Stuck Closed (Bank 1)
P2008 Intake Manifold Runner Control Circuit / Open (Bank 1)
P200A Intake Manifold Runner Performance (Bank1)
P2016 Sensor position. channel input / collector / Circuit switch. Low (Capacity 1)
P2017 Sensor position. channel input / collector / Circuit switch. High (Capacity 1)
P2096 Postcatalytic system. fuel balancing is too lax. (Capacity 1)
P2097 System postcatalytic. fuel balancing is too enriched. (Capacity 1)
P2101 Throttle Actuator Control Motor Circuit Range / Performance
P2104 Throttle Actuator Control System – Forced Idle
P2105 Throttle drive system – forced engine shutdown
P2106 Throttle drive system – forced voltage limitation
P2110 Throttle Actuator Control System – Forced Limited RPM
P2118 Throttle Actuator Control Motor Current Range / Performance
P2119 Throttle Actuator Control Throttle Body Range / Performance
P2122 Throttle / Pedal Position Sensor / Switch ‘D’ Circuit Low Input
P2123 Throttle / Pedal Position Sensor / Switch ‘D’ Circuit High Input
P2127 Throttle / Pedal Position Sensor / Switch. ‘E’ Chain Low. at the entrance
P2128 Throttle L / RDeci: Opposite Orientation8 YAPEREC ;. ‘E’ -High. at the entrance
P2138 Throttle / Pedal Position Sensor / Switch. Aspect. Voltage D / E
P2159 Vehicle Speed ​​Sensor ‘B’ Range / Performance (Wheel Speed ​​Sensor)
P2187 The system is too lax. at idle (- Additive) (Capacity 1)
P2188 The system is too enriched. at idle (Capacity 1)
P2191 The system is too lax. at a higher load (Multiple) (Capacity 1)
P2192 The system is too enriched. at a higher load (Capacity 1)
P2195 O2 Sensor Signal Stuck Lean (Bank 1 Sensor 1)
P2196 O2 Sensor Signal Stuck Rich (Bank 1 Sensor 1)
P2237 O2 Sensor Pumping Current Circuit / Open (Bank 1 Sensor 1)
P2243 O2 Sensor Reference Voltage Circuit / Open (Bank 1 Sensor 1)
P2251 O2 Sensor Reference Ground Circuit / Open (Bank 1 Sensor 1)
P2270 O2 Sensor Signal Stuck Lean (Bank 1 Sensor 2)
P2271 O2 Sensor Signal Stuck Rich (Bank 1 Sensor 2)
P2297 O2 Sensor Out of Range During Deceleration – Bank 1 Sensor 1
P2414 O2 Sensor Exhaust Sample Error (Bank 1 Sensor 1)
P2501 EPMD, voltage tolerance
P2502 Charging System Voltage
P2503 No battery charging
P2610 ECM / PCM Internal shutdown timer
P2626 O2 Sensor Pumping Current Trim Circuit / Open (Bank 1 Sensor 1)
U1111 Battery sensor, fault (detected by the computer)

2011> G 2.0 DOHC> Engine> Unleaded GEN

P0011 A Camshaft Position-Timing Over-Advanced or System Performance (Bank 1)
P0014 B Camshaft Position – Timing Over-Advanced or System Performance (Bank 1)
P0016 Ratio Crankshaft Position – Camshaft Position (Capacity 1 Sensor A)
P0017 Crankshaft Position – Camshaft Position Correlation (Bank 1 Sensor)
P0030 HO2S Heater Control Circuit (Capacity 1 / Sensor 1)
P0031 HO2S Heater Control Circuit Low. (Capacity 1 / Sensor 1)
P0032 HO2S Heater Control Circuit High. (Capacity 1 / Sensor 1)
P0036 HO2S Heater Control Circuit (Capacity 1 / Sensor 2)
P0037 HO2S Heater Control Circuit Low. (Capacity 1 / Sensor 2)
P0038 HO2S Heater Control Circuit High. (Capacity 1 / Sensor 2)
P0076 Valve solenoid valve circuit at input -Low. (Capacity 1)
P0077 Valve solenoid circuit at the input -High. (Capacity 1)
P0079 Exhaust Valve Control Solenoid Circuit Low (Bank 1)
P0080 Exhaust Valve Control Solenoid Circuit High (Bank 1)
P0106 ​​The collector absolute pressure circuit is barometric. pressure – Range / Characteristics
P0107 The collector absolute pressure circuit is barometric. Low pressure. at the entrance
P0108 The collector absolute pressure circuit is barometric. pressure High. at the entrance

P0111 Intake Air Temperature Sensor Circuit 1 Circuit Range / Characteristics
P0112 Inlet air temperature sensor low circuit input 1
P0113 Intake Air Temperature Sensor Circuit 1 High. at the entrance
P0116 Engine Coolant Temperature Chain Range / Performance
P0117 Engine coolant temperature signal circuit Low. at the entrance
P0118 Engine coolant temperature signal circuit High. at the entrance
P0119 Engine coolant temperature signal circuit Interrupt.
P0121 Throttle LYADatches: OppositeRopadal8Japerek ;. ‘A’ Chain Range / Characteristics
P0122 THROTTLE LAYERS: Setpoints: Ruled 8; ‘A’ Chain Low. at the entrance
P0123 Throttle LYADatches: OppositePopadal8Japerek ;. ‘A’ Chain High. at the entrance
P0125 Insufficient refrigerant temperature for regulation. fuel in a closed cycle
P0128 Refrigerant Thermostat (Temperature below thermostat range)
P0130 Sensor Circuit O2 (Capacity 1 / Sensor 1)
P0131 O2 Sensor Circuit Low. voltage (Capacity 1 / Sensor 1)
P0132 Sensor Circuit O2 High. voltage (Capacity 1 / Sensor 1)
P0133 Sensor Circuit O2 Low Sensitivity (Capacity 1 / Sensor 1)
P0134 Sensor Circuit O2 No Activity Signs Found (Capacity 1 Sensor 1)
P0135 Sensor O2 – Heater circuit (Capacity 1 / Sensor 1)
P0136 O2 sensor circuit (Capacity 1 / Sensor 2)
P0137 O2 Sensor Circuit Low. voltage (Capacity 1 / Sensor 2)
P0138 Sensor Circuit O2 High. voltage (Capacity 1 / Sensor 2)
P0139 Sensor Circuit O2 Low Sensitivity (Capacity 1 / Sensor 2)
P0140 Sensor Circuit O2 No Signs of Activity (Capacity 1 / Sensor 2)
P0170 Fuel balancing (Capacity 1)
P0221 Throttle / Pedal Position Sensor / Switch ‘B’ Circuit Range / Performance
P0222 Throttle LAYERS: The settings of the Span8; ‘B’ Chain Low. at the entrance
P0223 Throttle LAYERS: Range settings 8 Span; ‘B’ The chain is high. at the entrance
P0230 Primary circuit of the fuel pump
P0261 Cylinder 1 Injector circuit Low.
P0262 Cylinder 1 Injector circuit High.
P0264 Cylinder 2 Injector circuit Low.
P0265 Cylinder 2 Injector circuit High.
P0267 Cylinder 3 Injector circuit Low.
P0268 Cylinder 3 Injector circuit High.
P0270 Cylinder 4 Injector circuit Low.
P0271 Cylinder 4 Injector circuit High.
P0300 Ignition misfire detected. / Multiple cylinders
P0301 Cylinder 1-Ignition misfire detected
P0302 Cylinder 2-Ignition misfire detected
P0303 Cylinder 3-Ignition misfire detected
P0304 Cylinder 4-Ignition misfire detected
P0315 Camshaft Position Sensor (CMP) Error
P0326 Knock Sensor Circuit 1 Range / Characteristics (Capacity 1 or Single Sensor)
P0335 Crankshaft Position Sensor Circuit ‘A’
P0336 Crankshaft Position Sensor Circuit ‘A’ Range / Characteristics
P0340 Camshaft Position Sensor ‘A’ Circuit (Single Sensor)
P0341 Camshaft Position Sensor A Circuit Range / Characteristics (Capacity 1)
P0365 Camshaft Position Sensor B Circuit failure (Capacity 1)
P0366 Camshaft Position Sensor ‘B’ Circuit Range / Performance (Bank 1)
P0420 The efficiency of the catalytic system is below the threshold value (Capacity 1)
P0441 Vapor control system Inadequate blowdown flow
P0442 Vapor Control System-Leakage Detected (Low Leakage)
P0444 Vapor Control System – PCSV Valve Circuit Open.
P0445 Vapor Control System – PCSV Valve Circuit Shorted
P0447 Vapor Control System – Ventilation Control Circuit Open.
P0448 Evaporative Emission System – Vent Control Circuit Shorted
P0449 Vapor control system – Fan circuit. valve / electromagnet.
P0451 Vapor Control System- Pressure Sensor Range / Characteristics
P0452 Vapor Control System – Pressure Sensor Low. at the entrance
P0453 Vapor monitoring system – High pressure sensor. at the entrance
P0454 Vapor Control System – Pressure Sensor Interrupt.
P0455 Vapor Control System-Leakage Detected (Large Leakage)
P0456 Vapor Control System-Leak Detected (Very Low Leakage)
P0462 LOOPLOCK sensor0Reflower0 ‘A’ Low. at the entrance
P0463 LOOPPROTECTION OVERLOAD DRAFT 0 ‘A’ High. at the entrance
P0464 Chain LR sensor for thermostat ‘A’ Break.
P0471 ChainLocatorRoistorOfRed Fuel0 ‘A’ Range / Characteristics
P0501 Vehicle speed sensor A Range / Characteristics

P0504 Ratio5Switch P05 brake ‘0 ‘A’ / ‘B’
P0506 Air Control System idling – Speed ​​below expected
P0507 Air control system at idle speed – Rotational speed higher than expected
P0532 Chain LR sensor of the air; Cooling air conditioner; A0 ‘A’ Low. at the entrance
P0533 ChainLR sensor of the air; Cooling air conditioner; A ‘High’. at the entrance
P0551 Power Steering Pressure Sensor / Chain Switch. Range / Characteristics
P0560 Voltage in the system
P0562 System voltage Low.
P0563 Voltage in the system High.
P0564 Cruise control Multi-function input circuit A
P0605 Internal Control Unit ROM Error (Read Only Memory)
P0620 Generator, control circuit
P0625 Generator excitation / F-contact Circuit Low.
P0626 Generator excitation / F-contact High-voltage circuit.
P0630 VIN Not programmable or incompatible with ECM / PCM
P0638 Throttle Actuator Control Range / Performance (Bank 1)
P0642 Sensors: Relay5Pressure5 ‘A’ Circuit Low.
P0643 Sensors: Relay5Pressure5 ‘A’ High Circuit.
P0650 Malfunction Indicator Lamp (MIL) – Control Circuit
P0652 Sensors: Relay5Pressure5 ‘B’ Circuit Low.
P0653 Sensors: Relay5Pressure5 ‘B’ High Circuit.
P0661 IMT valve control circuit Low. (Capacity 1)
P0662 IMT Valve Control Circuit High. (Capacity 1)
P0698 Sensor Reference voltage C Circuit Low.
P0699 Sensor Reference voltage C High voltage circuit.
P06A4 Sensor Reference Voltage ‘D’ Circuit Low
P06A5 Sensor Reference Voltage ‘D’ Circuit High
P0704 Clutch Switch Input Circuit Malfunction
P2004 Intake Manifold Runner Control Stuck Open (Bank 1)
P2006 Intake Manifold Runner Control Stuck Closed (Bank 1)
P2008 Intake Manifold Runner Control Circuit / Open (Bank 1)
P200A Intake Manifold Runner Performance (Bank1)
P2016 Sensor position. channel input / collector / Circuit switch. Low (Capacity 1)
P2017 Sensor position. channel input / collector / Circuit switch. High (Capacity 1)
P2096 Postcatalytic system. fuel balancing is too lax. (Capacity 1)
P2097 System postcatalytic. fuel balancing is too enriched. (Capacity 1)
P2101 Throttle Actuator Control Motor Circuit Range / Performance
P2104 Throttle Actuator Control System – Forced Idle
P2105 Throttle drive system – forced engine shutdown
P2106 Throttle drive system – forced voltage limitation
P2110 Throttle Actuator Control System – Forced Limited RPM
P2118 Throttle Actuator Control Motor Current Range / Performance
P2119 Throttle Actuator Control Throttle Body Range / Performance
P2122 Throttle / Pedal Position Sensor / Switch ‘D’ Circuit Low Input
P2123 Throttle / Pedal Position Sensor / Switch ‘D’ Circuit High Input
P2127 Throttle / Pedal Position Sensor / Switch. ‘E’ Chain Low. at the entrance
P2128 Throttle L / RDeci: Opposite Orientation8 YAPEREC ;. ‘E’ -High. at the entrance
P2138 Throttle / Pedal Position Sensor / Switch. Aspect. Voltage D / E
P2159 Vehicle Speed ​​Sensor ‘B’ Range / Performance (Wheel Speed ​​Sensor)
P2187 The system is too lax. at idle (- Additive) (Capacity 1)
P2188 The system is too enriched. at idle (Capacity 1)
P2191 The system is too lax. at a higher load (Multiple) (Capacity 1)
P2192 The system is too enriched. at a higher load (Capacity 1)
P2195 O2 Sensor Signal Stuck Lean (Bank 1 Sensor 1)
P2196 O2 Sensor Signal Stuck Rich (Bank 1 Sensor 1)
P2237 O2 Sensor Pumping Current Circuit / Open (Bank 1 Sensor 1)
P2243 O2 Sensor Reference Voltage Circuit / Open (Bank 1 Sensor 1)
P2251 O2 Sensor Reference Ground Circuit / Open (Bank 1 Sensor 1)
P2270 O2 Sensor Signal Stuck Lean (Bank 1 Sensor 2)
P2271 O2 Sensor Signal Stuck Rich (Bank 1 Sensor 2)
P2297 O2 Sensor Out of Range During Deceleration – Bank 1 Sensor 1
P2414 O2 Sensor Exhaust Sample Error (Bank 1 Sensor 1)
P2501 EPMD, voltage tolerance
P2502 Charging System Voltage
P2503 No battery charging
P2610 ECM / PCM Internal shutdown timer
P2626 O2 Sensor Pumping Current Trim Circuit / Open (Bank 1 Sensor 1)
U0001 High Speed ​​CAN Communication Bus off
U0101 Loss of communication with TCM
U1111 Battery sensor, fault (detected by the computer)

2011> G 2.0 DOHC> Immobilizer> Immobilizer

P1610 EMS without immobilizer option connected to immobilizer
P1674 Immobilizer-Transponder status Error
P1675 Immobilizer-Transponder Programming Error
P1676 Immobilizer-Smartra Message Error
P1690 Immobilizer-Smartra No Response
P1691 Immobilizer-Antenna Coil Error
P1692 Immobilizer: Indicator lamp error
P1693 Immobilizer – Transmitter error
P1694 Immobilizer-EMS Message Error
P1695 Immobilizer-EMS Memory Error
P1696 / P1689 Immobilizer-Authentication Fail
P1699 Immobilizer – Double attempt was repeated
P169A Immobilizer-SMARTRA Authentication Fail

2011> G 2.0 DOHC> Smart Key> Smart Key Code Saving

P1676 Immobilizer-Smartra Message Error
P1690 Immobilizer-Smartra No Response
P1695 Immobilizer-EMS Memory Error
P1696 Immobilizer-Authentication Fail
P1699 Immobilizer – Double attempt was repeated

2011> G 2.0 DOHC> Smart Key> Smart Key Unit

B1602 CAN BUS Physical Error
B1603 CAN channel off.
B1604 Loss of communication between BCM and IFU
B1609 CAN, the timeout between SMK and SJB
B1613 CAN, timeout between SMK and CLUs
B1625 ECM COMMUNICATION DATA FAILURE
B1971 Positions 5 ‘Parking’ – Input error
B1978 Electronic steering column lock (ESCL), malfunction
B1987 Internal microprocessor, error
B1988 ESCL, power circuit, short to battery
B1989 ESCL, ground circuit, short circuit to battery
B1990 ESCL, power circuit, short to ground
B1991 BCM: Low. voltage / Lin Communication line (Tx)
B2120 SMK, IGN1 control output fault

2011> G 2.0 DOHC> Steering> Power Steering

C1101 High Battery Voltage
C1102 Battery voltage Low.
C1109 Ignition Circuit Open
C1112 Sensor supply voltage failure
C1259 Steering Angle Sensor – Electrical Malfunction
C1261 Wheel Angle Sensor – Not Calibrated
C1290 Torque sensor main signal fail
C1603 ECU thermal protection
C1604 ECU Hardware Error
C1611 CAN time-out ECM
C1612 CAN time-out TCM
C1616 CAN channel off.
C1622 EMS invalid vehicle speed
C1628 CAN Timeout – Cluster
C1646 CAN Message Failure – TCU
C1656 Internal vehicle RF source e.g. scanner
C1692 CAN, timeout exceeded VSM
C1693 CAN, VSM signal error
C1696 SPAS time out
C1697 CAN, SPAS message error
C1702 Encoding error option
C1704 ECU Fault Relay Failure
C2401 Motor circuit
C2412 Motor Closed. or Open.
C2413 Motor current fail (current over)

2011> G 2.0 DOHC> Transmission> Automatic Transaxle

P0601 Internal control unit Checksum error
P0705 Transmission Range Sensor Circuit Malfunction
P0706 Transmission Range Sensor Circuit Range / Performance
P0712 Chain LR Sensor0RemperatureRtransmission9Fig. 8 ‘A’ Low. at the entrance
P0713 Chain LR Sensor0RemperatureKtransmission9Fig. 8 ‘A’ High. at the entrance
P0717 Input / Turbine Speed ​​Sensor ‘A’ Circuit No Signal
P0722 Output Speed ​​Sensor Circuit No Signal
P0729 Gear 6 Incorrect Ratio
P0731 Transmit 1 Wrong relationship
P0732 Transmission 2 Wrong relationship
P0733 Transmission 3 Wrong relationship
P0734 Transmission 4 Wrong relationship
P0735 Transmission 5 Wrong relationship
P0741 Torque Converter Clutch Circuit Performance or Stuck Off
P0743 Torque converter coupling Electrical circuit
P0748 Pressure Control Solenoid Valve (VFS) ‘A’ Electrical
P0753 Collision data saved
P0758 Shift solenoid valve “B” (clutch 2-6 gears / brake)
P0763 The solenoid valve “C” of the shift control (35R / coupling lock GT)
P0768 Collision data saved
P0773 Rear airbag Passenger circuit short to Battery
P0880 TCM Power Signal Error Open / Short (GND)
P0955 Manual mode in automatic transmission, circuit failure
P2709 Mass or Volume Air Flow ‘B’ Circuit High Input
2011> G 2.4 DOHC> Air Conditioner> Air Conditioner

B1204 Air mixture Potentiometer Open (Low) – Passenger
B1205 Air mixture Potentiometer Tight. (High.) – Passenger
B1208 Input potentiometer Open (Low)
B1209 Input potentiometer Short. (High.)
B1233 Temperature sensor inside the compartment. (Low)
B1234 Interior temperature sensor Open (High.)
B1237 Ambient temperature sensor (Low)
B1238 Ambient Temperature Sensor Open (High.)
B1241 Vapor Sensor (Low)
B1242 Vapor Sensor Open (High.)
B1245 Air mixture Potentiometer Open (Low) – (Driver)
B1246 Air mixture Potentiometer Tight. (High.) – (Driver)
B1249 Direction potentiometer Open (Low) – (Driver)
B1250 Directional potentiometer. (High.) – (Driver)
B1672 APT Sensor Fault – CAN Signal
B1685 Engine RPM fault – CAN Signal
B1686 Vehicle Speed ​​Sensor Fault – CAN Signal
B1687 Engine Coolant Temperature Sensor Circuit – CAN Signal
B1688 Cluster Ionizer Fault
B2406 Air mixture Motor – (Driver)
B2408 Engine intake system
B2409 Motor Control Flows – (Driver)
B2415 Air mixture Motor vehicle. doors – (Passenger)

2011> G 2.4 DOHC> Airbag> Airbag (Event # 1)

B1101 Battery voltage High.
B1102 Low battery voltage
B1328 FIS (Front Impact Sensor) – (Driver) Defect
B1329 FIS (Front Impact Sensor) – (Driver) Communication error
B1330 FIS (Front Impact Sensor) – (Driver) Invalid ID
B1333 FIS (Front Impact Sensor) – (Passenger) Defect
B1334 FIS (Front Impact Sensor) – (Passenger) Communication error
B1335 FIS (Front Impact Sensor) – (Passenger) Invalid ID
B1346 Driver’s air cushion resistance too High. (1st stage)
B1347 Driver air cushion resistance too low. (1st stage)
B1348 Resistance of the driver air bag. on the ground (1st stage)
B1349 Resistance of the driver air bag. on the battery (stage 1)
B1352 Passenger airbag resistance too high. (1st stage)
B1353 Passenger airbag resistance too low. (1st stage)
B1354 Passenger airbag resistance circuit. on the ground (1st stage)
B1355 Passenger airbag resistance circuit. on the battery (stage 1)
B1361 Tensioner Front- (Driver) Resistance too High.
B1362 Tensioner Front- (Driver) Resistance too Low.
B1363 Tensioner Front- (Driver) Resistance chain. Zakoroch. to the ground
B1364 Tensioner Front- (Driver) Resistance chain. Zakoroch. on the battery
B1367 Tensioner Front- (Passenger) Resistance too High.
B1368 Tensioner Front- (Passenger) Resistance too Low.
B1369 Tensioner Front- (Passenger) Resistance chain. Zakoroch. to the ground

B1370 Tensioner Front- (Passenger) Resistance chain. Zakoroch. on the battery
B1378 Air bag of the sides. Front- (Driver) Resistance too High.
B1379 Air bag of the sides. Front- (Driver) Resistance too Low.
B1380 Air bag of the sides. Front- (Driver) Resistance chain. Zakoroch. to the ground
B1381 Air bag of the sides. Front- (Driver) Resistance chain. Zakoroch. on the battery
B1382 Air bag of the sides. Front- (Passenger) Resistance too High.
B1383 Air cushion of the sides. Front- (Passenger) Resistance too Low.
B1384 Air bag of the sides. Front- (Passenger) Chain resistance. Zakoroch. to the ground
B1385 Air bag of the sides. Front- (Passenger) Chain resistance. Zakoroch. on the battery
B1395 Error installing Ignition Circuits
B1400 SIS (Side Impact Sensor) Front- (Driver) Defect
B1403 SIS (Side Impact Sensor) Front- (Passenger) Defect
B1409 SIS (Side Impact Sensor) Front- (Driver) Communication error
B1410 SIS (Side Impact Sensor) Front- (Passenger) Communication error
B1414 SIS (Side Impact Sensor) Front- (Driver) Invalid ID
B1415 SIS (Side Impact Sensor) Front- (Passenger) Invalid ID
B1473 Inflatable add. air. pillow Front- (Driver) Resistance too High.
B1474 Inflatable add. air. cushion Front- (Driver) Resistance too Low.
B1475 Inflatable add. air. pillow Front- (Driver) Chain resistance. Zakoroch. to the ground
B1476 Inflatable add. air. pillow Front- (Driver) Chain resistance. Zakoroch. on the battery
B1477 Inflatable extra. air. pillow Front- (Passenger) Resistance too High.
B1478 Inflatable add. air. pillow Front- (Passenger) Resistance too Low.
B1479 Inflatable add. air. pillow Front- (Passenger) Chain resistance. Zakoroch. to the ground
B1480 Inflatable extra. air. pillow Front- (Passenger) Chain resistance. Zakoroch. on the battery
B1527 Passenger airbag deactivation switch Open. or Zakoroch. on the battery
B1528 Passenger airbag deactivation switch. or Zakoroch. to the ground
B1529 Passenger Airbag Deactivation Deactivation Switch
B1620 Internal error- Replace SRSCM
B1649 Collision recorded – Inverting vehicle (replace ECU)
B1650 Collision recorded only in the 1st stage (Frontal-replace SRSCM)
B1651 The collision is recorded in the front-on driver’s side-air. cushion (replace SRSCM)
B1652 Collision recorded in the front-passenger side, air. cushion (replace SRSCM)
B1683 Exceed Maximum Coding Number
B1684 ACU Configuration is different
B1730 Driver’s seat belt tensioner resistance too high
B1731 Driver’s seat belt tensioner resistance too low
B1732 Short to ground in the driver’s seat belt tensioner chain
B1733 Battery short circuit in driver’s seat belt tensioner circuit
B1762 ACU Coding Error
B2500 Warning Lamp – Failure
B2505 Failure of the deactivation warning light. passenger pillows

2011> G 2.4 DOHC> Airbag> Airbag (Event # 2)

B1101 Battery voltage High.
B1102 Low battery voltage
B1328 FIS (Front Impact Sensor) – (Driver) Defect
B1329 FIS (Front Impact Sensor) – (Driver) Communication error
B1330 FIS (Front Impact Sensor) – (Driver) Invalid ID
B1333 FIS (Front Impact Sensor) – (Passenger) Defect
B1334 FIS (Front Impact Sensor) – (Passenger) Communication error
B1335 FIS (Front Impact Sensor) – (Passenger) Invalid ID
B1346 Driver’s air cushion resistance too High. (1st stage)
B1347 Driver air cushion resistance too low. (1st stage)
B1348 Resistance of the driver air bag. on the ground (1st stage)
B1349 Resistance of the driver air bag. on the battery (stage 1)
B1352 Passenger airbag resistance too high. (1st stage)
B1353 Passenger airbag resistance too low. (1st stage)
B1354 Passenger airbag resistance circuit. on the ground (1st stage)
B1355 Passenger airbag resistance circuit. on the battery (stage 1)
B1361 Tensioner Front- (Driver) Resistance too High.
B1362 Tensioner Front- (Driver) Resistance too Low.
B1363 Tensioner Front- (Driver) Resistance chain. Zakoroch. to the ground
B1364 Tensioner Front- (Driver) Resistance chain. Zakoroch. on the battery
B1367 Tensioner Front- (Passenger) Resistance too High.
B1368 Tensioner Front- (Passenger) Resistance too Low.

B1369 Tensioner Front- (Passenger) Resistance chain. Zakoroch. to the ground
B1370 Tensioner Front- (Passenger) Resistance chain. Zakoroch. on the battery
B1378 Air bag of the sides. Front- (Driver) Resistance too High.
B1379 Air bag of the sides. Front- (Driver) Resistance too Low.
B1380 Air bag of the sides. Front- (Driver) Resistance chain. Zakoroch. to the ground
B1381 Air bag of the sides. Front- (Driver) Resistance chain. Zakoroch. on the battery
B1382 Air bag of the sides. Front- (Passenger) Resistance too High.
B1383 Air cushion of the sides. Front- (Passenger) Resistance too Low.
B1384 Air bag of the sides. Front- (Passenger) Chain resistance. Zakoroch. to the ground
B1385 Air bag of the sides. Front- (Passenger) Chain resistance. Zakoroch. on the battery
B1395 Error installing Ignition Circuits
B1400 SIS (Side Impact Sensor) Front- (Driver) Defect
B1403 SIS (Side Impact Sensor) Front- (Passenger) Defect
B1409 SIS (Side Impact Sensor) Front- (Driver) Communication error
B1410 SIS (Side Impact Sensor) Front- (Passenger) Communication error
B1414 SIS (Side Impact Sensor) Front- (Driver) Invalid ID
B1415 SIS (Side Impact Sensor) Front- (Passenger) Invalid ID
B1473 Inflatable add. air. pillow Front- (Driver) Resistance too High.
B1474 Inflatable add. air. cushion Front- (Driver) Resistance too Low.
B1475 Inflatable add. air. pillow Front- (Driver) Chain resistance. Zakoroch. to the ground
B1476 Inflatable add. air. pillow Front- (Driver) Chain resistance. Zakoroch. on the battery
B1477 Inflatable extra. air. pillow Front- (Passenger) Resistance too High.
B1478 Inflatable add. air. pillow Front- (Passenger) Resistance too Low.
B1479 Inflatable add. air. pillow Front- (Passenger) Chain resistance. Zakoroch. to the ground
B1480 Inflatable extra. air. pillow Front- (Passenger) Chain resistance. Zakoroch. on the battery
B1527 Passenger airbag deactivation switch Open. or Zakoroch. on the battery
B1528 Passenger airbag deactivation switch. or Zakoroch. to the ground
B1529 Passenger Airbag Deactivation Deactivation Switch
B1620 Internal error- Replace SRSCM
B1649 Collision recorded – Inverting vehicle (replace ECU)
B1650 Collision recorded only in the 1st stage (Frontal-replace SRSCM)
B1651 The collision is recorded in the front-on driver’s side-air. cushion (replace SRSCM)
B1652 Collision recorded in the front-passenger side, air. cushion (replace SRSCM)
B1683 Exceed Maximum Coding Number
B1684 ACU Configuration is different
B1730 Driver’s seat belt tensioner resistance too high
B1731 Driver’s seat belt tensioner resistance too low
B1732 Short to ground in the driver’s seat belt tensioner chain
B1733 Battery short circuit in driver’s seat belt tensioner circuit
B1762 ACU Coding Error
B2500 Warning Lamp – Failure
B2505 Failure of the deactivation warning light. passenger pillows

2011> G 2.4 DOHC> Body Control> Body Control Module

B1214 Rear Left Sensor Fault
B1215 Rear Center Left Sensor Fault
B1216 Rear Center Right Sensor Fault
B1217 Rear Right Sensor Fault
B1602 CAN error
B1603 CAN channel off.
B1613 CAN, timeout between IPM and CLUs
B1690 CAN, timeout between IPM and SJB

2011> G 2.4 DOHC> Body Control> Smart Junction Box

B1602 CAN error
B1603 CAN-OFF channel.
B2351 SCG reverse lights
B2352 SCG left individual fire DRL
B2353 SCG right-hand single fire DRL
B2510 Right Headlamp High Circuit Short to Ground
B2511 Left Headlamp High Circuit Short to Ground
B2512 Right Headlamp Low Circuit Short to Ground
B2513 Left Headlamp Low Circuit Short to Ground
B2514 Right side light, short circuit to earth
B2515 Left parking light, short circuit to earth
B2516 Front fog lamp, short to ground
B2517 Indicator of parking lights, short circuit to earth

2011> G 2.4 DOHC> Brake> Electronic Stability Program

C1101 Battery voltage High.
C1102 Battery voltage Low.
C1112 Sensor source voltage
C1200 Wheel speed sensor Front-LH Open / Closed.
C1201 Wheel speed sensor Front-LH Range / Characteristics / Interrupt.
C1202 Wheel speed sensor Front-LH Incorrect / no signal
C1203 Wheel speed sensor Front-RH Open / Closed.
C1204 Wheel speed sensor Front-RH Range / Characteristics / Interrupt.
C1205 Wheel speed sensor Front-RH Invalid / no signal
C1206 Wheel speed sensor Rear-LH Open / Close.
C1207 Wheel Speed ​​Sensor Rear-LH Range / Characteristics / Interrupt.
C1208 Wheel speed sensor Rear-LH Incorrect / no signal
C1209 Wheel speed sensor Rear-RH Open / Close.
C1210 Wheel speed sensor Rear-RH Range / Characteristics / Interrupt.
C1211 Wheel speed sensor Rear-RH Incorrect / no signal
C1235 Primary pressure sensor – El. chain
C1237 Primary Pressure Transmitter – Signal
C1260 Steering Angle Sensor Circuit-Signal
C1261 Wheel Angle Sensor – Not Calibrated
C1274 Longitudinal G sensor open / short
C1275 Range error / Sensor characteristics longitudinal. accelerating
C1282 Car steering sensor around vert. axis and transversely. acceleration – Electr.
C1283 Vehicle turn signal sensor around the vertical. axis and transversely. Acceleration – Signal
C1285 Sensor unit, detected change / violation of calibration
C1503 TCS / ESP Switching. Error
C1513 Brake switch error
C1520 Clutch switch
C1526 HDC SWITCH ERROR
C1527 Collision data saved
C1604 ECU Hardware Error
C1605 CAN Hardware error
C1611 CAN time-out ECM
C1612 CAN time-out TCM
C1613 CAN Invalid message
C1616 CAN channel off.
C1623 CAN time-out Steering angle sensor
C1627 CAN time-out 4WD
C1647 CAN HARDWARE ERROR – SENSOR CHANNEL
C1687 CAN, MDPS timeout
C1688 MDPS Signal Error
C1702 Encoding error option
C2112 Electronic relay error
C2130 Brake Relay Lamp Error
C2227 Excessive temperature of the brake disc
C2380 ABS / TCS / ESP valve error
C2402 Electr. motor

2011> G 2.4 DOHC> Driveshaft> 4WD Control

P0602 Control Module Programming Error
P1779 No power supply
P1780 High Battery Voltage
P1781 Battery voltage Low.
P1820 4WD CAN signal error or communication error
P1821 CAN signal 4WD error or communication error
P1822 4WD CAN signal error or communication error
P1823 CAN alarm 4WD or communication error
P1824 4WD CAN signal error or communication error
P1825 CAN alarm 4WD or communication error
P1826 CAN alarm 4WD or communication error
P1827 4WD CAN signal error or communication error
P1828 CAN alarm 4WD or communication error
P1829 Upper tolerance limit for clutch torque
P1830 Clutch torque lower limit
P1831 Thermal overload warning of clutch
P1832 Shutdown warning due to thermal clutch overload
P1833 Thermal overload warning of drive
P1834 Shutdown warning due to thermal overload of the drive
P1835 4WD CAN signal error or communication error
P1836 Pressure Relief Check Error
P1837 Variant encoding of vehicle is not detected
U0100 Loss of communication with ECM / PCM ‘A’
U0101 Loss of communication with TCM
U0121 Communication loss with ABS control module
U0122 Lost Communication With Vehicle Dynamics Control Module
U0126 Steering angle signal fault
U1121 Loss of communication with the electronic stability program module

2011> G 2.4 DOHC> Engine> Leaded All

P0011 A Camshaft Position-Timing Over-Advanced or System Performance (Bank 1)
P0014 B Camshaft Position – Timing Over-Advanced or System Performance (Bank 1)
P0016 Ratio Crankshaft Position – Camshaft Position (Capacity 1 Sensor A)
P0017 Crankshaft Position – Camshaft Position Correlation (Bank 1 Senso)
P0030 HO2S Heater Control Circuit (Capacity 1 / Sensor 1)
P0031 HO2S Heater Control Circuit Low. (Capacity 1 / Sensor 1)
P0032 HO2S Heater Control Circuit High. (Capacity 1 / Sensor 1)
P0036 HO2S Heater Control Circuit (Capacity 1 / Sensor 2)
P0037 HO2S Heater Control Circuit Low. (Capacity 1 / Sensor 2)
P0038 HO2S Heater Control Circuit High. (Capacity 1 / Sensor 2)
P0076 Valve solenoid valve circuit at input -Low. (Capacity 1)
P0077 Valve solenoid circuit at the input -High. (Capacity 1)
P0079 Exhaust Valve Control Solenoid Circuit Low (Bank 1)
P0080 Exhaust Valve Control Solenoid Circuit High (Bank 1)
P0106 ​​The collector absolute pressure circuit is barometric. pressure – Range / Characteristics
P0107 The collector absolute pressure circuit is barometric. Low pressure. at the entrance
P0108 The collector absolute pressure circuit is barometric. pressure High. at the entrance
P0111 Intake Air Temperature Sensor Circuit 1 Circuit Range / Characteristics
P0112 Inlet air temperature sensor low circuit input 1
P0113 Intake Air Temperature Sensor Circuit 1 High. at the entrance
P0116 Engine Coolant Temperature Chain Range / Performance
P0117 Engine coolant temperature signal circuit Low. at the entrance
P0118 Engine coolant temperature signal circuit High. at the entrance
P0119 Engine coolant temperature signal circuit Interrupt.
P0121 Throttle LYADatches: OppositeRopadal8Japerek ;. ‘A’ Chain Range / Characteristics
P0122 THROTTLE LAYERS: Setpoints: Ruled 8; ‘A’ Chain Low. at the entrance
P0123 Throttle LYADatches: OppositePopadal8Japerek ;. ‘A’ Chain High. at the entrance
P0125 Insufficient refrigerant temperature for regulation. fuel in a closed cycle
P0128 Refrigerant Thermostat (Temperature below thermostat range)
P0130 Sensor Circuit O2 (Capacity 1 / Sensor 1)
P0131 O2 Sensor Circuit Low. voltage (Capacity 1 / Sensor 1)
P0132 Sensor Circuit O2 High. voltage (Capacity 1 / Sensor 1)
P0133 Sensor Circuit O2 Low Sensitivity (Capacity 1 / Sensor 1)
P0134 Sensor Circuit O2 No Activity Signs Found (Capacity 1 Sensor 1)
P0135 Sensor O2 – Heater circuit (Capacity 1 / Sensor 1)
P0136 O2 sensor circuit (Capacity 1 / Sensor 2)
P0137 O2 Sensor Circuit Low. voltage (Capacity 1 / Sensor 2)
P0138 Sensor Circuit O2 High. voltage (Capacity 1 / Sensor 2)
P0139 Sensor Circuit O2 Low Sensitivity (Capacity 1 / Sensor 2)
P0140 Sensor Circuit O2 No Signs of Activity (Capacity 1 / Sensor 2)
P0170 Fuel balancing (Capacity 1)

P0221 Throttle / Pedal Position Sensor / Switch ‘B’ Circuit Range / Performance
P0222 Throttle LAYERS: The settings of the Span8; ‘B’ Chain Low. at the entrance
P0223 Throttle LAYERS: Range settings 8 Span; ‘B’ The chain is high. at the entrance
P0230 Primary circuit of the fuel pump
P0261 Cylinder 1 Injector circuit Low.
P0262 Cylinder 1 Injector circuit High.
P0264 Cylinder 2 Injector circuit Low.
P0265 Cylinder 2 Injector circuit High.
P0267 Cylinder 3 Injector circuit Low.
P0268 Cylinder 3 Injector circuit High.
P0270 Cylinder 4 Injector circuit Low.
P0271 Cylinder 4 Injector circuit High.
P0300 Ignition misfire detected. / Multiple cylinders
P0301 Cylinder 1-Ignition misfire detected
P0302 Cylinder 2-Ignition misfire detected
P0303 Cylinder 3-Ignition misfire detected
P0304 Cylinder 4-Ignition misfire detected
P0315 Camshaft Position Sensor (CMP) Error
P0326 Knock Sensor Circuit 1 Range / Characteristics (Capacity 1 or Single Sensor)
P0335 Crankshaft Position Sensor Circuit ‘A’
P0336 Crankshaft Position Sensor Circuit ‘A’ Range / Characteristics
P0340 Camshaft Position Sensor ‘A’ Circuit (Single Sensor)
P0341 Camshaft Position Sensor A Circuit Range / Characteristics (Capacity 1)
P0365 Camshaft Position Sensor B Circuit failure (Capacity 1)
P0366 Camshaft Position Sensor ‘B’ Circuit Range / Performance (Bank 1)
P0420 The efficiency of the catalytic system is below the threshold value (Capacity 1)
P0441 Vapor control system Inadequate blowdown flow
P0442 Vapor Control System-Leakage Detected (Low Leakage)
P0444 Vapor Control System – PCSV Valve Circuit Open.
P0445 Vapor Control System – PCSV Valve Circuit Shorted
P0447 Vapor Control System – Ventilation Control Circuit Open.
P0448 Evaporative Emission System – Vent Control Circuit Shorted
P0449 Vapor control system – Fan circuit. valve / electromagnet.
P0451 Vapor Control System- Pressure Sensor Range / Characteristics
P0452 Vapor Control System – Pressure Sensor Low. at the entrance
P0453 Vapor monitoring system – High pressure sensor. at the entrance
P0454 Vapor Control System – Pressure Sensor Interrupt.
P0455 Vapor Control System-Leakage Detected (Large Leakage)
P0456 Vapor Control System-Leak Detected (Very Low Leakage)
P0462 LOOPLOCK sensor0Reflower0 ‘A’ Low. at the entrance
P0463 LOOPPROTECTION OVERLOAD DRAFT 0 ‘A’ High. at the entrance
P0464 Chain LR sensor for thermostat ‘A’ Break.
P0471 ChainLocatorRoistorOfRed Fuel0 ‘A’ Range / Characteristics
P0501 Vehicle speed sensor A Range / Characteristics
P0504 Ratio5Switch P05 brake ‘0 ‘A’ / ‘B’
P0506 Air Control System idling – Speed ​​below expected
P0507 Air control system at idle speed – Rotational speed higher than expected
P0532 Chain LR sensor of the air; Cooling air conditioner; A0 ‘A’ Low. at the entrance
P0533 ChainLR sensor of the air; Cooling air conditioner; A ‘High’. at the entrance
P0551 Power Steering Pressure Sensor / Chain Switch. Range / Characteristics
P0560 Voltage in the system
P0562 System voltage Low.
P0563 Voltage in the system High.
P0564 Cruise control Multi-function input circuit A
P0605 Internal Control Unit ROM Error (Read Only Memory)
P0620 Generator, control circuit
P0625 Generator excitation / F-contact Circuit Low.
P0626 Generator excitation / F-contact High-voltage circuit.
P0630 VIN Not programmable or incompatible with ECM / PCM
P0638 Throttle Actuator Control Range / Performance (Bank 1)
P0642 Sensors: Relay5Pressure5 ‘A’ Circuit Low.
P0643 Sensors: Relay5Pressure5 ‘A’ High Circuit.
P0650 Malfunction Indicator Lamp (MIL) – Control Circuit
P0652 Sensors: Relay5Pressure5 ‘B’ Circuit Low.

P0653 Sensors: Relay5Pressure5 ‘B’ High Circuit.
P0661 IMT valve control circuit Low. (Capacity 1)
P0662 IMT Valve Control Circuit High. (Capacity 1)
P0698 Sensor Reference voltage C Circuit Low.
P0699 Sensor Reference voltage C High voltage circuit.
P06A4 Sensor Reference Voltage ‘D’ Circuit Low
P06A5 Sensor Reference Voltage ‘D’ Circuit High
P0704 Clutch Switch Input Circuit Malfunction
P2004 Intake Manifold Runner Control Stuck Open (Bank 1)
P2006 Intake Manifold Runner Control Stuck Closed (Bank 1)
P2008 Intake Manifold Runner Control Circuit / Open (Bank 1)
P200A Intake Manifold Runner Performance (Bank1)
P2016 Sensor position. channel input / collector / Circuit switch. Low (Capacity 1)
P2017 Sensor position. channel input / collector / Circuit switch. High (Capacity 1)
P2096 Postcatalytic system. fuel balancing is too lax. (Capacity 1)
P2097 System postcatalytic. fuel balancing is too enriched. (Capacity 1)
P2101 Throttle Actuator Control Motor Circuit Range / Performance
P2104 Throttle Actuator Control System – Forced Idle
P2105 Throttle drive system – forced engine shutdown
P2106 Throttle drive system – forced voltage limitation
P2110 Throttle Actuator Control System – Forced Limited RPM
P2118 Throttle Actuator Control Motor Current Range / Performance
P2119 Throttle Actuator Control Throttle Body Range / Performance
P2122 Throttle / Pedal Position Sensor / Switch ‘D’ Circuit Low Input
P2123 Throttle / Pedal Position Sensor / Switch ‘D’ Circuit High Input
P2127 Throttle / Pedal Position Sensor / Switch. ‘E’ Chain Low. at the entrance
P2128 Throttle L / RDeci: Opposite Orientation8 YAPEREC ;. ‘E’ -High. at the entrance
P2138 Throttle / Pedal Position Sensor / Switch. Aspect. Voltage D / E
P2159 Vehicle Speed ​​Sensor ‘B’ Range / Performance (Wheel Speed ​​Sensor)
P2187 The system is too lax. at idle (- Additive) (Capacity 1)
P2188 The system is too enriched. at idle (Capacity 1)
P2191 The system is too lax. at a higher load (Multiple) (Capacity 1)
P2192 The system is too enriched. at a higher load (Capacity 1)
P2195 O2 Sensor Signal Stuck Lean (Bank 1 Sensor 1)
P2196 O2 Sensor Signal Stuck Rich (Bank 1 Sensor 1)
P2237 O2 Sensor Pumping Current Circuit / Open (Bank 1 Sensor 1)
P2243 O2 Sensor Reference Voltage Circuit / Open (Bank 1 Sensor 1)
P2251 O2 Sensor Reference Ground Circuit / Open (Bank 1 Sensor 1)
P2270 O2 Sensor Signal Stuck Lean (Bank 1 Sensor 2)
P2271 O2 Sensor Signal Stuck Rich (Bank 1 Sensor 2)
P2297 O2 Sensor Out of Range During Deceleration – Bank 1 Sensor 1
P2414 O2 Sensor Exhaust Sample Error (Bank 1 Sensor 1)
P2501 EPMD, voltage tolerance
P2502 Charging System Voltage
P2503 No battery charging
P2610 ECM / PCM Internal shutdown timer
P2626 O2 Sensor Pumping Current Trim Circuit / Open (Bank 1 Sensor 1)
U1111 Battery sensor, fault (detected by the computer)

2011> G 2.4 DOHC> Engine> Unleaded EOBD

P0011 A Camshaft Position-Timing Over-Advanced or System Performance (Bank 1)
P0014 B Camshaft Position – Timing Over-Advanced or System Performance (Bank 1)
P0016 Ratio Crankshaft Position – Camshaft Position (Capacity 1 Sensor A)
P0017 Crankshaft Position – Camshaft Position Correlation (Bank 1 Sensor)
P0030 HO2S Heater Control Circuit (Capacity 1 / Sensor 1)
P0031 HO2S Heater Control Circuit Low. (Capacity 1 / Sensor 1)
P0032 HO2S Heater Control Circuit High. (Capacity 1 / Sensor 1)
P0036 HO2S Heater Control Circuit (Capacity 1 / Sensor 2)
P0037 HO2S Heater Control Circuit Low. (Capacity 1 / Sensor 2)
P0038 HO2S Heater Control Circuit High. (Capacity 1 / Sensor 2)
P0076 Valve solenoid valve circuit at input -Low. (Capacity 1)
P0077 Valve solenoid circuit at the input -High. (Capacity 1)

P0079 Exhaust Valve Control Solenoid Circuit Low (Bank 1)
P0080 Exhaust Valve Control Solenoid Circuit High (Bank 1)
P0106 ​​The collector absolute pressure circuit is barometric. pressure – Range / Characteristics
P0107 The collector absolute pressure circuit is barometric. Low pressure. at the entrance
P0108 The collector absolute pressure circuit is barometric. pressure High. at the entrance
P0111 Intake Air Temperature Sensor Circuit 1 Circuit Range / Characteristics
P0112 Inlet air temperature sensor low circuit input 1
P0113 Intake Air Temperature Sensor Circuit 1 High. at the entrance
P0116 Engine Coolant Temperature Chain Range / Performance
P0117 Engine coolant temperature signal circuit Low. at the entrance
P0118 Engine coolant temperature signal circuit High. at the entrance
P0119 Engine coolant temperature signal circuit Interrupt.
P0121 Throttle LYADatches: OppositeRopadal8Japerek ;. ‘A’ Chain Range / Characteristics
P0122 THROTTLE LAYERS: Setpoints: Ruled 8; ‘A’ Chain Low. at the entrance
P0123 Throttle LYADatches: OppositePopadal8Japerek ;. ‘A’ Chain High. at the entrance
P0125 Insufficient refrigerant temperature for regulation. fuel in a closed cycle
P0128 Refrigerant Thermostat (Temperature below thermostat range)
P0130 Sensor Circuit O2 (Capacity 1 / Sensor 1)
P0131 O2 Sensor Circuit Low. voltage (Capacity 1 / Sensor 1)
P0132 Sensor Circuit O2 High. voltage (Capacity 1 / Sensor 1)
P0133 Sensor Circuit O2 Low Sensitivity (Capacity 1 / Sensor 1)
P0134 Sensor Circuit O2 No Activity Signs Found (Capacity 1 Sensor 1)
P0135 Sensor O2 – Heater circuit (Capacity 1 / Sensor 1)
P0136 O2 sensor circuit (Capacity 1 / Sensor 2)
P0137 O2 Sensor Circuit Low. voltage (Capacity 1 / Sensor 2)
P0138 Sensor Circuit O2 High. voltage (Capacity 1 / Sensor 2)
P0139 Sensor Circuit O2 Low Sensitivity (Capacity 1 / Sensor 2)
P0140 Sensor Circuit O2 No Signs of Activity (Capacity 1 / Sensor 2)
P0170 Fuel balancing (Capacity 1)
P0221 Throttle / Pedal Position Sensor / Switch ‘B’ Circuit Range / Performance
P0222 Throttle LAYERS: The settings of the Span8; ‘B’ Chain Low. at the entrance
P0223 Throttle LAYERS: Range settings 8 Span; ‘B’ The chain is high. at the entrance
P0230 Primary circuit of the fuel pump
P0261 Cylinder 1 Injector circuit Low.
P0262 Cylinder 1 Injector circuit High.
P0264 Cylinder 2 Injector circuit Low.
P0265 Cylinder 2 Injector circuit High.
P0267 Cylinder 3 Injector circuit Low.
P0268 Cylinder 3 Injector circuit High.
P0270 Cylinder 4 Injector circuit Low.
P0271 Cylinder 4 Injector circuit High.
P0300 Ignition misfire detected. / Multiple cylinders
P0301 Cylinder 1-Ignition misfire detected
P0302 Cylinder 2-Ignition misfire detected
P0303 Cylinder 3-Ignition misfire detected
P0304 Cylinder 4-Ignition misfire detected
P0315 Camshaft Position Sensor (CMP) Error
P0326 Knock Sensor Circuit 1 Range / Characteristics (Capacity 1 or Single Sensor)
P0335 Crankshaft Position Sensor Circuit ‘A’
P0336 Crankshaft Position Sensor Circuit ‘A’ Range / Characteristics
P0340 Camshaft Position Sensor ‘A’ Circuit (Single Sensor)
P0341 Camshaft Position Sensor A Circuit Range / Characteristics (Capacity 1)
P0365 Camshaft Position Sensor B Circuit failure (Capacity 1)
P0366 Camshaft Position Sensor ‘B’ Circuit Range / Performance (Bank 1)
P0420 The efficiency of the catalytic system is below the threshold value (Capacity 1)
P0441 Vapor control system Inadequate blowdown flow
P0442 Vapor Control System-Leakage Detected (Low Leakage)
P0444 Vapor Control System – PCSV Valve Circuit Open.
P0445 Vapor Control System – PCSV Valve Circuit Shorted
P0447 Vapor Control System – Ventilation Control Circuit Open.
P0448 Evaporative Emission System – Vent Control Circuit Shorted
P0449 Vapor control system – Fan circuit. valve / electromagnet.
P0451 Vapor Control System- Pressure Sensor Range / Characteristics
P0452 Vapor Control System – Pressure Sensor Low. at the entrance
P0453 Vapor monitoring system – High pressure sensor. at the entrance
P0454 Vapor Control System – Pressure Sensor Interrupt.
P0455 Vapor Control System-Leakage Detected (Large Leakage)
P0456 Vapor Control System-Leak Detected (Very Low Leakage)
P0462 LOOPLOCK sensor0Reflower0 ‘A’ Low. at the entrance
P0463 LOOPPROTECTION OVERLOAD DRAFT 0 ‘A’ High. at the entrance
P0464 Chain LR sensor for thermostat ‘A’ Break.
P0471 ChainLocatorRoistorOfRed Fuel0 ‘A’ Range / Characteristics
P0501 Vehicle speed sensor A Range / Characteristics
P0504 Ratio5Switch P05 brake ‘0 ‘A’ / ‘B’

P0506 Air Control System idling – Speed ​​below expected
P0507 Air control system at idle speed – Rotational speed higher than expected
P0532 Chain LR sensor of the air; Cooling air conditioner; A0 ‘A’ Low. at the entrance
P0533 ChainLR sensor of the air; Cooling air conditioner; A ‘High’. at the entrance
P0551 Power Steering Pressure Sensor / Chain Switch. Range / Characteristics
P0560 Voltage in the system
P0562 System voltage Low.
P0563 Voltage in the system High.
P0564 Cruise control Multi-function input circuit A
P0605 Internal Control Unit ROM Error (Read Only Memory)
P0620 Generator, control circuit
P0625 Generator excitation / F-contact Circuit Low.
P0626 Generator excitation / F-contact High-voltage circuit.
P0630 VIN Not programmable or incompatible with ECM / PCM
P0638 Throttle Actuator Control Range / Performance (Bank 1)
P0642 Sensors: Relay5Pressure5 ‘A’ Circuit Low.
P0643 Sensors: Relay5Pressure5 ‘A’ High Circuit.
P0650 Malfunction Indicator Lamp (MIL) – Control Circuit
P0652 Sensors: Relay5Pressure5 ‘B’ Circuit Low.
P0653 Sensors: Relay5Pressure5 ‘B’ High Circuit.
P0661 IMT valve control circuit Low. (Capacity 1)
P0662 IMT Valve Control Circuit High. (Capacity 1)
P0698 Sensor Reference voltage C Circuit Low.
P0699 Sensor Reference voltage C High voltage circuit.
P06A4 Sensor Reference Voltage ‘D’ Circuit Low
P06A5 Sensor Reference Voltage ‘D’ Circuit High
P0704 Clutch Switch Input Circuit Malfunction
P2004 Intake Manifold Runner Control Stuck Open (Bank 1)
P2006 Intake Manifold Runner Control Stuck Closed (Bank 1)
P2008 Intake Manifold Runner Control Circuit / Open (Bank 1)
P200A Intake Manifold Runner Performance (Bank1)
P2016 Sensor position. channel input / collector / Circuit switch. Low (Capacity 1)
P2017 Sensor position. channel input / collector / Circuit switch. High (Capacity 1)
P2096 Postcatalytic system. fuel balancing is too lax. (Capacity 1)
P2097 System postcatalytic. fuel balancing is too enriched. (Capacity 1)
P2101 Throttle Actuator Control Motor Circuit Range / Performance
P2104 Throttle Actuator Control System – Forced Idle
P2105 Throttle drive system – forced engine shutdown
P2106 Throttle drive system – forced voltage limitation
P2110 Throttle Actuator Control System – Forced Limited RPM
P2118 Throttle Actuator Control Motor Current Range / Performance
P2119 Throttle Actuator Control Throttle Body Range / Performance
P2122 Throttle / Pedal Position Sensor / Switch ‘D’ Circuit Low Input
P2123 Throttle / Pedal Position Sensor / Switch ‘D’ Circuit High Input
P2127 Throttle / Pedal Position Sensor / Switch. ‘E’ Chain Low. at the entrance
P2128 Throttle L / RDeci: Opposite Orientation8 YAPEREC ;. ‘E’ -High. at the entrance
P2138 Throttle / Pedal Position Sensor / Switch. Aspect. Voltage D / E
P2159 Vehicle Speed ​​Sensor ‘B’ Range / Performance (Wheel Speed ​​Sensor)
P2187 The system is too lax. at idle (- Additive) (Capacity 1)
P2188 The system is too enriched. at idle (Capacity 1)
P2191 The system is too lax. at a higher load (Multiple) (Capacity 1)
P2192 The system is too enriched. at a higher load (Capacity 1)
P2195 O2 Sensor Signal Stuck Lean (Bank 1 Sensor 1)
P2196 O2 Sensor Signal Stuck Rich (Bank 1 Sensor 1)
P2237 O2 Sensor Pumping Current Circuit / Open (Bank 1 Sensor 1)
P2243 O2 Sensor Reference Voltage Circuit / Open (Bank 1 Sensor 1)
P2251 O2 Sensor Reference Ground Circuit / Open (Bank 1 Sensor 1)
P2270 O2 Sensor Signal Stuck Lean (Bank 1 Sensor 2)
P2271 O2 Sensor Signal Stuck Rich (Bank 1 Sensor 2)
P2297 O2 Sensor Out of Range During Deceleration – Bank 1 Sensor 1
P2414 O2 Sensor Exhaust Sample Error (Bank 1 Sensor 1)
P2501 EPMD, voltage tolerance
P2502 Charging System Voltage
P2503 No battery charging
P2610 ECM / PCM Internal shutdown timer
P2626 O2 Sensor Pumping Current Trim Circuit / Open (Bank 1 Sensor 1)
U1111 Battery sensor, fault (detected by the computer)

2011> G 2.4 DOHC> Engine> Unleaded GEN

P0011 A Camshaft Position-Timing Over-Advanced or System Performance (Bank 1)
P0014 B Camshaft Position – Timing Over-Advanced or System Performance (Bank 1)
P0016 Ratio Crankshaft Position – Camshaft Position (Capacity 1 Sensor A)
P0017 Crankshaft Position – Camshaft Position Correlation (Bank 1 Sensor)
P0030 HO2S Heater Control Circuit (Capacity 1 / Sensor 1)
P0031 HO2S Heater Control Circuit Low. (Capacity 1 / Sensor 1)
P0032 HO2S Heater Control Circuit High. (Capacity 1 / Sensor 1)
P0036 HO2S Heater Control Circuit (Capacity 1 / Sensor 2)
P0037 HO2S Heater Control Circuit Low. (Capacity 1 / Sensor 2)
P0038 HO2S Heater Control Circuit High. (Capacity 1 / Sensor 2)

P0076 Valve solenoid valve circuit at input -Low. (Capacity 1)
P0077 Valve solenoid circuit at the input -High. (Capacity 1)
P0079 Exhaust Valve Control Solenoid Circuit Low (Bank 1)
P0080 Exhaust Valve Control Solenoid Circuit High (Bank 1)
P0106 ​​The collector absolute pressure circuit is barometric. pressure – Range / Characteristics
P0107 The collector absolute pressure circuit is barometric. Low pressure. at the entrance
P0108 The collector absolute pressure circuit is barometric. pressure High. at the entrance
P0111 Intake Air Temperature Sensor Circuit 1 Circuit Range / Characteristics
P0112 Inlet air temperature sensor low circuit input 1
P0113 Intake Air Temperature Sensor Circuit 1 High. at the entrance
P0116 Engine Coolant Temperature Chain Range / Performance
P0117 Engine coolant temperature signal circuit Low. at the entrance
P0118 Engine coolant temperature signal circuit High. at the entrance
P0119 Engine coolant temperature signal circuit Interrupt.
P0121 Throttle LYADatches: OppositeRopadal8Japerek ;. ‘A’ Chain Range / Characteristics
P0122 THROTTLE LAYERS: Setpoints: Ruled 8; ‘A’ Chain Low. at the entrance
P0123 Throttle LYADatches: OppositePopadal8Japerek ;. ‘A’ Chain High. at the entrance
P0125 Insufficient refrigerant temperature for regulation. fuel in a closed cycle
P0128 Refrigerant Thermostat (Temperature below thermostat range)
P0130 Sensor Circuit O2 (Capacity 1 / Sensor 1)
P0131 O2 Sensor Circuit Low. voltage (Capacity 1 / Sensor 1)
P0132 Sensor Circuit O2 High. voltage (Capacity 1 / Sensor 1)
P0133 Sensor Circuit O2 Low Sensitivity (Capacity 1 / Sensor 1)
P0134 Sensor Circuit O2 No Activity Signs Found (Capacity 1 Sensor 1)
P0135 Sensor O2 – Heater circuit (Capacity 1 / Sensor 1)
P0136 O2 sensor circuit (Capacity 1 / Sensor 2)
P0137 O2 Sensor Circuit Low. voltage (Capacity 1 / Sensor 2)
P0138 Sensor Circuit O2 High. voltage (Capacity 1 / Sensor 2)
P0139 Sensor Circuit O2 Low Sensitivity (Capacity 1 / Sensor 2)
P0140 Sensor Circuit O2 No Signs of Activity (Capacity 1 / Sensor 2)
P0170 Fuel balancing (Capacity 1)
P0221 Throttle / Pedal Position Sensor / Switch ‘B’ Circuit Range / Performance
P0222 Throttle LAYERS: The settings of the Span8; ‘B’ Chain Low. at the entrance
P0223 Throttle LAYERS: Range settings 8 Span; ‘B’ The chain is high. at the entrance
P0230 Primary circuit of the fuel pump
P0261 Cylinder 1 Injector circuit Low.
P0262 Cylinder 1 Injector circuit High.
P0264 Cylinder 2 Injector circuit Low.
P0265 Cylinder 2 Injector circuit High.
P0267 Cylinder 3 Injector circuit Low.
P0268 Cylinder 3 Injector circuit High.
P0270 Cylinder 4 Injector circuit Low.
P0271 Cylinder 4 Injector circuit High.
P0300 Ignition misfire detected. / Multiple cylinders
P0301 Cylinder 1-Ignition misfire detected
P0302 Cylinder 2-Ignition misfire detected
P0303 Cylinder 3-Ignition misfire detected
P0304 Cylinder 4-Ignition misfire detected
P0315 Camshaft Position Sensor (CMP) Error
P0326 Knock Sensor Circuit 1 Range / Characteristics (Capacity 1 or Single Sensor)
P0335 Crankshaft Position Sensor Circuit ‘A’
P0336 Crankshaft Position Sensor Circuit ‘A’ Range / Characteristics
P0340 Camshaft Position Sensor ‘A’ Circuit (Single Sensor)
P0341 Camshaft Position Sensor A Circuit Range / Characteristics (Capacity 1)
P0365 Camshaft Position Sensor B Circuit failure (Capacity 1)
P0366 Camshaft Position Sensor ‘B’ Circuit Range / Performance (Bank 1)
P0420 The efficiency of the catalytic system is below the threshold value (Capacity 1)
P0441 Vapor control system Inadequate blowdown flow
P0442 Vapor Control System-Leakage Detected (Low Leakage)
P0444 Vapor Control System – PCSV Valve Circuit Open.
P0445 Vapor Control System – PCSV Valve Circuit Shorted
P0447 Vapor Control System – Ventilation Control Circuit Open.
P0448 Evaporative Emission System – Vent Control Circuit Shorted
P0449 Vapor control system – Fan circuit. valve / electromagnet.
P0451 Vapor Control System- Pressure Sensor Range / Characteristics
P0452 Vapor Control System – Pressure Sensor Low. at the entrance
P0453 Vapor monitoring system – High pressure sensor. at the entrance
P0454 Vapor Control System – Pressure Sensor Interrupt.
P0455 Vapor Control System-Leakage Detected (Large Leakage)
P0456 Vapor Control System-Leak Detected (Very Low Leakage)
P0462 LOOPLOCK sensor0Reflower0 ‘A’ Low. at the entrance

P0463 LOOPPROTECTION OVERLOAD DRAFT 0 ‘A’ High. at the entrance
P0464 Chain LR sensor for thermostat ‘A’ Break.
P0471 ChainLocatorRoistorOfRed Fuel0 ‘A’ Range / Characteristics
P0501 Vehicle speed sensor A Range / Characteristics
P0504 Ratio5Switch P05 brake ‘0 ‘A’ / ‘B’
P0506 Air Control System idling – Speed ​​below expected
P0507 Air control system at idle speed – Rotational speed higher than expected
P0532 Chain LR sensor of the air; Cooling air conditioner; A0 ‘A’ Low. at the entrance
P0533 ChainLR sensor of the air; Cooling air conditioner; A ‘High’. at the entrance
P0551 Power Steering Pressure Sensor / Chain Switch. Range / Characteristics
P0560 Voltage in the system
P0562 System voltage Low.
P0563 Voltage in the system High.
P0564 Cruise control Multi-function input circuit A
P0605 Internal Control Unit ROM Error (Read Only Memory)
P0620 Generator, control circuit
P0625 Generator excitation / F-contact Circuit Low.
P0626 Generator excitation / F-contact High-voltage circuit.
P0630 VIN Not programmable or incompatible with ECM / PCM
P0638 Throttle Actuator Control Range / Performance (Bank 1)
P0642 Sensors: Relay5Pressure5 ‘A’ Circuit Low.
P0643 Sensors: Relay5Pressure5 ‘A’ High Circuit.
P0650 Malfunction Indicator Lamp (MIL) – Control Circuit

P0652 Sensors: Relay5Pressure5 ‘B’ Circuit Low.
P0653 Sensors: Relay5Pressure5 ‘B’ High Circuit.
P0661 IMT valve control circuit Low. (Capacity 1)
P0662 IMT Valve Control Circuit High. (Capacity 1)
P0698 Sensor Reference voltage C Circuit Low.
P0699 Sensor Reference voltage C High voltage circuit.
P06A4 Sensor Reference Voltage ‘D’ Circuit Low
P06A5 Sensor Reference Voltage ‘D’ Circuit High
P0704 Clutch Switch Input Circuit Malfunction
P2004 Intake Manifold Runner Control Stuck Open (Bank 1)
P2006 Intake Manifold Runner Control Stuck Closed (Bank 1)
P2008 Intake Manifold Runner Control Circuit / Open (Bank 1)
P200A Intake Manifold Runner Performance (Bank1)
P2016 Sensor position. channel input / collector / Circuit switch. Low (Capacity 1)
P2017 Sensor position. channel input / collector / Circuit switch. High (Capacity 1)
P2096 Postcatalytic system. fuel balancing is too lax. (Capacity 1)
P2097 System postcatalytic. fuel balancing is too enriched. (Capacity 1)
P2101 Throttle Actuator Control Motor Circuit Range / Performance
P2104 Throttle Actuator Control System – Forced Idle
P2105 Throttle drive system – forced engine shutdown
P2106 Throttle drive system – forced voltage limitation
P2110 Throttle Actuator Control System – Forced Limited RPM
P2118 Throttle Actuator Control Motor Current Range / Performance
P2119 Throttle Actuator Control Throttle Body Range / Performance
P2122 Throttle / Pedal Position Sensor / Switch ‘D’ Circuit Low Input
P2123 Throttle / Pedal Position Sensor / Switch ‘D’ Circuit High Input
P2127 Throttle / Pedal Position Sensor / Switch. ‘E’ Chain Low. at the entrance
P2128 Throttle L / RDeci: Opposite Orientation8 YAPEREC ;. ‘E’ -High. at the entrance
P2138 Throttle / Pedal Position Sensor / Switch. Aspect. Voltage D / E
P2159 Vehicle Speed ​​Sensor ‘B’ Range / Performance (Wheel Speed ​​Sensor)
P2187 The system is too lax. at idle (- Additive) (Capacity 1)
P2188 The system is too enriched. at idle (Capacity 1)
P2191 The system is too lax. at a higher load (Multiple) (Capacity 1)
P2192 The system is too enriched. at a higher load (Capacity 1)
P2195 O2 Sensor Signal Stuck Lean (Bank 1 Sensor 1)
P2196 O2 Sensor Signal Stuck Rich (Bank 1 Sensor 1)
P2237 O2 Sensor Pumping Current Circuit / Open (Bank 1 Sensor 1)
P2243 O2 Sensor Reference Voltage Circuit / Open (Bank 1 Sensor 1)
P2251 O2 Sensor Reference Ground Circuit / Open (Bank 1 Sensor 1)
P2270 O2 Sensor Signal Stuck Lean (Bank 1 Sensor 2)
P2271 O2 Sensor Signal Stuck Rich (Bank 1 Sensor 2)
P2297 O2 Sensor Out of Range During Deceleration – Bank 1 Sensor 1
P2414 O2 Sensor Exhaust Sample Error (Bank 1 Sensor 1)
P2501 EPMD, voltage tolerance
P2502 Charging System Voltage
P2503 No battery charging
P2610 ECM / PCM Internal shutdown timer
P2626 O2 Sensor Pumping Current Trim Circuit / Open (Bank 1 Sensor 1)

2011> G 2.4 DOHC> Immobilizer> Immobilizer

P1610 EMS without immobilizer option connected to immobilizer
P1674 Immobilizer-Transponder status Error
P1675 Immobilizer-Transponder Programming Error
P1676 Immobilizer-Smartra Message Error
P1690 Immobilizer-Smartra No Response
P1691 Immobilizer-Antenna Coil Error
P1692 Immobilizer: Indicator lamp error
P1693 Immobilizer – Transmitter error
P1694 Immobilizer-EMS Message Error
P1695 Immobilizer-EMS Memory Error
P1696 / P1689 Immobilizer-Authentication Fail
P1699 Immobilizer – Double attempt was repeated
P169A Immobilizer-SMARTRA Authentication Fail

2011> G 2.4 DOHC> Smart Key> Smart Key Unit

B1602 CAN BUS Physical Error
B1603 CAN channel off.
B1604 Loss of communication between BCM and IFU
B1609 CAN, the timeout between SMK and SJB
B1613 CAN, timeout between SMK and CLUs
B1625 ECM COMMUNICATION DATA FAILURE
B1971 Positions 5 ‘Parking’ – Input error
B1978 Electronic steering column lock (ESCL), malfunction
B1987 Internal microprocessor, error
B1988 ESCL, power circuit, short to battery
B1989 ESCL, ground circuit, short circuit to battery
B1990 ESCL, power circuit, short to ground
B1991 BCM: Low. voltage / Lin Communication line (Tx)
B2120 SMK, IGN1 control output fault

2011> G 2.4 DOHC> Steering> Power Steering

C1101 High Battery Voltage
C1102 Battery voltage Low.
C1109 Ignition Circuit Open
C1112 Sensor supply voltage failure
C1259 Steering Angle Sensor – Electrical Malfunction
C1261 Wheel Angle Sensor – Not Calibrated
C1290 Torque sensor main signal fail
C1603 ECU thermal protection
C1604 ECU Hardware Error
C1611 CAN time-out ECM
C1612 CAN time-out TCM
C1616 CAN channel off.
C1622 EMS invalid vehicle speed
C1628 CAN Timeout – Cluster
C1646 CAN Message Failure – TCU
C1656 Internal vehicle RF source e.g. scanner
C1692 CAN, timeout exceeded VSM
C1693 CAN, VSM signal error
C1696 SPAS time out
C1697 CAN, SPAS message error
C1702 Encoding error option
C1704 ECU Fault Relay Failure
C2401 Motor circuit
C2412 Motor Closed. or Open.
C2413 Motor current fail (current over)

2011> G 2.4 DOHC> Transmission> Automatic Transaxle

P0601 Internal control unit Checksum error
P0705 Transmission Range Sensor Circuit Malfunction
P0706 Transmission Range Sensor Circuit Range / Performance
P0712 Chain LR Sensor0RemperatureRtransmission9Fig. 8 ‘A’ Low. at the entrance
P0713 Chain LR Sensor0RemperatureKtransmission9Fig. 8 ‘A’ High. at the entrance
P0717 Input / Turbine Speed ​​Sensor ‘A’ Circuit No Signal
P0722 Output Speed ​​Sensor Circuit No Signal
P0729 Gear 6 Incorrect Ratio
P0731 Transmit 1 Wrong relationship
P0732 Transmission 2 Wrong relationship
P0733 Transmission 3 Wrong relationship
P0734 Transmission 4 Wrong relationship
P0735 Transmission 5 Wrong relationship
P0741 Torque Converter Clutch Circuit Performance or Stuck Off
P0743 Torque converter coupling Electrical circuit
P0748 Pressure Control Solenoid Valve (VFS) ‘A’ Electrical
P0753 Collision data saved
P0758 Shift solenoid valve “B” (clutch 2-6 gears / brake)
P0763 The solenoid valve “C” of the shift control (35R / coupling lock GT)
P0768 Collision data saved
P0773 Rear airbag Passenger circuit short to Battery
P0880 TCM Power Signal Error Open / Short (GND)
P0955 Manual mode in automatic transmission, circuit failure
P2709 Mass or Volume Air Flow ‘B’ Circuit High Input