For the operational and road safety as well as the value retention of your vehicle, it is important that all maintenance work is carried out at the prescribed intervals.
The detailed, up-to-date service schedule for your vehicle is available at the workshop.
European service intervals
Service due every 30 000 km or after 1 year, whichever comes first.
The European service schedule applies to the following countries:
Andorra, Austria, Belgium, Bosnia- Herzegovina, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Greenland, Hungary, Iceland, Ireland, Israel, Italy, Latvia, Lithuania, Luxembourg, Macedonia, Malta, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, United Kingdom.
International service intervals
Service due every 15,000 km or after 1 year, whichever comes first.
International service intervals apply to countries not listed under European service intervals.
Service work performed is confirmed in the service and warranty booklet.
The date and mileage are supplemented by the stamp and signature of the relevant workshop.
Make sure that the service and warranty booklet is filled out correctly, because a complete service record is of decisive importance in warranty or goodwill cases, but also an advantage when selling the vehicle.
Predefined service interval
When a service is due, InSP appears in the service display for approx. 10 seconds when the ignition is switched on. Have the next service performed by a workshop within a week or within 500 km (whichever comes first).
Flexible service interval
The service interval is based on several parameters depending on the use and is calculated using these parameters.
If the remaining run distance is less than 1500 km, InSP is displayed with a remaining run distance of 1000 km when the ignition is switched on and off.
If the remaining running distance is less than 1000 km, InSP appears for a few seconds. Have next service performed by a workshop within a week or within 500 km (whichever comes first).
Display of the remaining running distance. 1:
1. switch off ignition.
Briefly press the reset button for the trip odometer. The odometer display appears. 3.
Press and hold the reset button again for approx. 2 seconds, InSP and the remaining mileage are displayed.